I found all the dependencies, just installed from source.
Now hp-check runs perfectly without returning any error.
But xsane just halts and crashes, as it did before...
I suppose there is something bad in the messages sent
to the HP OJ. If it gets in the state "Waiting to scan." it
should mean that it's ready to scan, but nothing happens.
Seems like it's waiting from some other message...
More thanks,
Claudio A. Andreoni
> Ok, I did imagine.
> Did loaded the module but the scanning operation still holds with the
> message "Waiting to scan." on the printer screen.
>
> Still missing dependecies are:
> reportlab (optional)
> libusb (required) [that is installed, don't know why it doesn't get it]
> libnetsnmp-devel (required)
> I have no idea about where to pull libnetsnmp out from... may this trouble
> be related to this?
>
> Thanks
> Claudio A. Andreoni
>
> On Tuesday 26 December 2006 17:31, you wrote:
> Yes, 'ppdev' is a required module. Please run this command:
>
> # modprobe ppdev
>
> as root/superuser.
>
> -Don
>
> On 12/25/06, Claudio Alberto Andreoni <[EMAIL PROTECTED]> wrote:
> >
> > I've attached as plain text the output of hp-check.
> > It seems that the kernel module ppdev is missing, but it wasn't
> > called as a required dependency by yum, the package manager.
> > My OJ1150Pro really prints (on the parallel port), how may this
> > cause trouble? Am I supposed to (compile it and) load it as a
> > separate kernel module?
> >
> > I've got an ASUS A7V600 motherboard and I never changed the default
> > configuration for the parallel port, and it always worked under Linux.
> > There are apparently no configuration parameters for the LPT, except for
> > the deactivating option.
> > Feel free to ask me all the specific technical stuff you need.
> >
> > Thanks,
> > Claudio A. Andreoni
> >
> >
> > > Would you happen to know how your BIOS is configured for your par part?
> > >
> > > You may want to reply to the list. I'm actually going on vacation and
> > > my internet access may be iffy. I may need to try and reproduce this
> > > on a like unit when I get back.
> > >
> > > Can you run hp-check and post that as well?
> > >
> > > A
> > >
> > > On 12/18/06, Claudio Alberto Andreoni <[EMAIL PROTECTED]> wrote:
> > > > Ok sorry I didn't found them before (while running tail):
> >
> > > Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675] error: Unable to
> > communicate with device: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
> > > Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675]: warning: Device
> > not found
> > > Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675] error: Unable to
> > communicate with device: hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0
> > > Dec 18 18:52:22 cloudguitar python: hp-toolbox[6675]: warning: Device
> > not found
> > > Dec 18 18:52:56 cloudguitar xsane: unable to fill data buffer:
> > size=18411: prnt/hpijs/hplip_api.c 450
> > > Dec 18 18:53:26 cloudguitar hpiod: ParDevice::wait_status timeout
> > status=7e mask=88 val=0 us=30000000: io/hpiod/ppdevice.cpp 118
> > > Dec 18 18:53:27 cloudguitar hpiod: ParDevice::wait_status timeout
> > status=de mask=40 val=0 us=1000000: io/hpiod/ppdevice.cpp 118
> > > Dec 18 18:53:58 cloudguitar last message repeated 31 times
> > > Dec 18 18:54:12 cloudguitar last message repeated 14 times
> > > Dec 18 18:54:12 cloudguitar hpiod: unable to read MlcReverseData header:
> > Success hp:/par/OFFICEJET_PRO_1150C?device=/dev/parport0 io/hpiod/mlc.cpp
> > 500
> > >
> > > Regards,
> > > Claudio A.
> > >
> > > > scanimage -L:
> > > > [EMAIL PROTECTED] cloudguitar]# scanimage -L
> > > > device `hpaio:/par/OFFICEJET_PRO_1150C?device=/dev/parport0' is a hp
> > HP
> > > > OFFICEJET PRO 1150C multi-function peripheral
> > > >
> > > > tail -f /var/log/messages:
> > > > [EMAIL PROTECTED] cloudguitar]# tail -f /var/log/messages
> > > > Dec 18 18:21:03 cloudguitar gconfd (cloudguitar-3549): Received signal
> > 15,
> > > > shutting down cleanly Dec 18 18:21:04 cloudguitar gconfd
> > > > (cloudguitar-3549): Exiting
> > > > Dec 18 18:21:06 cloudguitar kernel: agpgart: Found an AGP 3.5compliant
> > > > device at 0000:00:00.0. Dec 18 18:21:06 cloudguitar kernel: agpgart:
> > > > Putting AGP V3 device at 0000:00:00.0 into 8x mode Dec 18 18:21:06
> > > > cloudguitar kernel: agpgart: Putting AGP V3 device at 0000:01:00.0into
> > > > 8x
> > > > mode Dec 18 18:21:24 cloudguitar gdm[2442]: Couldn't authenticate user
> > > > Dec 18 18:26:50 cloudguitar gconfd (cloudguitar-6326): starting
> > (version
> > > > 2.14.0), pid 6326 user 'cloudguitar' Dec 18 18:26:51 cloudguitar
> > gconfd
> > > > (cloudguitar-6326): Resolved address
> > > > "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
> > configuration
> > > > source at position 0 Dec 18 18:26:51 cloudguitar gconfd
> > (cloudguitar-6326):
> > > > Resolved address "xml:readwrite:/home/cloudguitar/.gconf" to a
> > writable
> > > > configuration source at position 1 Dec 18 18:26:51 cloudguitar gconfd
> > > > (cloudguitar-6326): Resolved address
> > > > "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
> > configuration
> > > > source at position 2
> > > >
> > > >
> > > > Is this enough?
> > > > Thanks,
> > > > Claudio A.
> > >
> > >
> > > On Monday 18 December 2006 18:40, you wrote:
> > > > Can you run scanimage -L and post the output?
> > > >
> > > > Also run:
> > > >
> > > > tail -f /var/log/messages
> > > >
> > > > then try and scan and post any errors from the /var/log/messages.
> > > >
> > > > Aaron
> > > >
> > > > On 12/18/06, Claudio Alberto Andreoni <[EMAIL PROTECTED]> wrote:
> > > > > Hello,
> > > > > I am using a HP OfficeJet Pro 1150C on a Fedora Core 6 Zen.
> > > > > While it is possible to me to print, if I try to scan, both the
> > device and the
> > > > > involved application (xsane or kooka) halt. If I do kill xsane, the
> > printer comes
> > > > > back in the "1 Copy / 100%"-mode that is the default idle message on
> > the
> > > > > screen of the printer, but I can't get no scanning at all.
> > > > > It seems a little bug or misconfiguration but it causes me a lot of
> > trouble.
> > > > > And using the old HPOJ (on my former Fedora Core 4), everything is
> > fine.
> > > > > I would accept hints and I thank everybody in advance.
> > > > >
> > > > > Regards,
> > > > > Claudio A.
> > > > >
> > > > >
> > -------------------------------------------------------------------------
> > > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > > Join SourceForge.net's Techsay panel and you'll get the chance to
> > share your
> > > > > opinions on IT & business topics through brief surveys - and earn
> > cash
> > > > >
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > > > _______________________________________________
> > > > > HPLIP-Help mailing list
> > > > > HPLIP-Help@lists.sourceforge.net
> > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > > > >
> > > >
> > > >
> > >
> >
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > your
> > opinions on IT & business topics through brief surveys - and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> >
> > _______________________________________________
> > HPLIP-Help mailing list
> > HPLIP-Help@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/hplip-help
> >
> >
> >
> >
>
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
