Hi everyone,
I am revisiting this problem after a break of some months.
I have an HP Officejet 1170c that hangs whenever I try to scan through xsane.
Xsane detects it ok and loads up and the scanner makes the normal noise. When
pressing Preview or Scan the CPU hits 100% and stays there.
Here is output of /var/log/messages and scanimage -L from Debian Etch system.
[EMAIL PROTECTED]:~$ sudo tail /var/log/messages
Jan 18 23:45:37 morocco hpiod: device cleanup
uri=hp:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0
Jan 18 23:46:22 morocco gconfd (dan1-3005): Exiting
Jan 18 23:46:22 morocco gconfd (dan1-4122): starting (version 2.16.0), pid 4122
user 'dan1'
Jan 18 23:46:22 morocco gconfd (dan1-4122): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration
source at position 0
Jan 18 23:46:22 morocco gconfd (dan1-4122): Resolved address
"xml:readwrite:/home/dan1/.gconf" to a writable configuration source at
position 1
Jan 18 23:46:22 morocco gconfd (dan1-4122): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration
source at position 2
Jan 18 23:46:22 morocco gconfd (dan1-4122): Resolved address
"xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration
source at position 3
Jan 18 23:46:22 morocco gconfd (dan1-4122): Resolved address
"xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at
position 4
Jan 18 23:46:37 morocco gconfd (dan1-4122): Resolved address
"xml:readwrite:/home/dan1/.gconf" to a writable configuration source at
position 0
Jan 18 23:48:19 morocco xsane: unable to fill data buffer: size=18411:
prnt/hpijs/hplip_api.c 450
-----------------------------------------------------------------------------------
[EMAIL PROTECTED]:~$ scanimage -L
[sanei_debug] Setting debug level of dll to 128.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.18
[dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ...
[dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[dll] sane_init/read_config: reading dll.d/hplip
[dll] add_backend: adding backend `hpaio'
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: reading dll.conf
[dll] add_backend: adding backend `hpaio'
[dll] add_backend: `hpaio' is already there
[dll] sane_get_devices
[dll] load: searching backend `hpaio' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpaio.so.1'
[dll] init: initializing backend `hpaio'
[dll] init: backend `hpaio' is version 1.0.6
[dll] sane_get_devices: found 2 devices
device `hpaio:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0' is a hp
OFFICEJET_PRO_1170C_SERIES multi-function peripheral
device `hpaio:/par/OFFICEJET_PRO_1170C_SERIES?device=/dev/parport0' is a hp
OFFICEJET_PRO_1170C_SERIES multi-function peripheral
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpaio's exit function
[dll] sane_exit: finished
[EMAIL PROTECTED]:~$
------------------------------------------
Versions:
HP Linux Imaging and Printing System (ver. 1.6.10)
Device Information Utility ver. 3.4
xsane 0.991
The scanner used to work with Suse 9.2, but since then I have not had it
working on any distributions.
Currently I am running Ubuntu 6.10 and Debian Etch both with the same results
and have tried on other distributions.
Any help would be appreciated.
Kind Regards,
Daniel Phillips
--
Daniel Phillips
[EMAIL PROTECTED]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
