It looks like you are missing LSB which will make the hplip daemons not run
correctly. Install lsb
su
apt-get install lsb
then
/etc/init.d/hplip restart
/etc/init.d/cupsys restart
Then re-run hp-check and post the output.
A
On 2/1/07, Alvaro Proaño <[EMAIL PROTECTED]> wrote:
Are there any other HP PSC 500 or ALL-In-ONE users that have both their
printer/scanner in the parallel port!
I need their help!!!
On 1/31/07, Alvaro Proaño <[EMAIL PROTECTED]> wrote:
>
> I just installed the new hp-lip and I just did hp-check and I get 2
> errors. How do I fix these? How do I do the scan work!
>
> HP Linux Imaging and Printing System (ver. 1.6.12)
> Dependency/Version Check Utility ver. 5.2
>
> Copyright (c) 2003-6 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
>
>
> ---------------
> | SYSTEM INFO |
> ---------------
>
> Basic system information:
> Linux misantropo 2.6.18-gentoo-r6 #1 SMP Fri Jan 26 19:45:18 PET 2007
> x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
>
> Detected distro (/etc/issue):
> mepis 0.0
>
> Detected distro (lsb_release):
> error: lsb_release not found.
>
> Currently installed HPLIP version...
> HPLIP 1.6.12 currently installed in '/usr/share/hplip'.
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf
>
> [hpiod]
> # port=0 (dynamic IP port)
> port=2208
> [hpssd]
> # port=0 (dynamic IP port)
> port=2207
>
> [hplip]
> version=1.6.12
> jdprobe=0
>
> [dirs]
> home=/usr/share/hplip
> run=/var/run
> ppd=/usr/share/ppd/HP
> doc=/usr/share/doc/hplip-1.6.12
>
> # Following values are determined at configure time and cannot be
> changed.
> [configure]
> network-build=1
> pp-build=1
> gui-build=1
> scanner-build=1
> fax-build=1
> installinitd=
> chkconfig=
> internal-tag= 1.6.12.15
>
>
> HPLIP running?
> No, HPLIP is not running (OK).
>
> HPOJ running?
> No, HPOJ is not running (OK).
>
> Checking Python version...
> OK, version 2.4.3 installed
>
> Checking PyQt version...
> OK, version 3.17 installed.
>
> Checking SIP version...
> OK, Version 4.5.2 installed
>
> ----------------
> | DEPENDENCIES |
> ----------------
>
>
> Checking for dependency libcrypto - OpenSSL cryptographic library...
> OK, found.
>
> Checking for dependency gcc - GNU Project C and C++ Compiler...
> OK, found.
>
> Checking for dependency SANE - Scanning library...
> OK, found.
>
> Checking for dependency GhostScript - PostScript and PDF language
> interpreter and previewer...
> OK, found.
>
> Checking for dependency libjpeg - JPEG library...
> OK, found.
>
> Checking for dependency libpthread - POSIX threads library...
> OK, found.
>
> Checking for dependency make - GNU make utility to maintain groups of
> programs...
> OK, found.
>
> Checking for dependency python-devel - Python development files...
> OK, found.
>
> Checking for dependency Reportlab - PDF library for Python...
> error: Not found!
> This is an OPTIONAL dependency. Some HPLIP functionality may not
> function properly.
>
> Checking for dependency PyQt - Qt interface for Python...
> OK, found.
>
> Checking for dependency cups-devel- Common Unix Printing System
> development files...
> OK, found.
>
> Checking for dependency ppdev - Parallel port support kernel module....
> OK, found.
>
> Checking for dependency libusb - USB library...
> OK, found.
>
> Checking for dependency scanimage - Shell scanning program...
> OK, found.
>
> Checking for dependency libnetsnmp-devel - SNMP networking library
> development files...
> OK, found.
>
> Checking for dependency Python 2.2 or greater - Python programming
> language...
> OK, found.
>
> Checking for dependency LSB - Linux Standard Base support...
> error: Not found!
> error: This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
>
> Checking for dependency xsane - Graphical scanner frontend for SANE...
> OK, found.
>
> Checking for dependency cups - Common Unix Printing System...
> OK, found.
>
> Checking for dependency Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
>
>
> ----------------------
> | INSTALLED PRINTERS |
> ----------------------
>
>
> hp_par_PSC_500
> --------------
> Device URI: hp:/par/PSC_500?device=/dev/parport0
> Installed in HPLIP? Yes
> PPD: /etc/cups/ppd/hp_par_PSC_500.ppd
> PPD Description: HP PSC 500 Foomatic/hpijs (recommended)
> Printer status: printer hp_par_PSC_500 is idle. enabled since Tue Jan
> 30 16:18:15 2007
>
>
>
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
>
> 'hpaio' in /etc/sane.d/dll.conf'...
> OK, found. SANE backend 'hpaio' is properly set up.
>
> Checking output of 'scanimage -L'...
>
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
>
>
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
>
> Checking 'cupsext' CUPS extension...
> OK, found.
>
> Checking 'pcardext' Photocard extension...
> OK, found.
>
>
> 2 errors were detected.
> Please refer to the installation instructions at:
> http://hplip.sourceforge.net/install/index.html
>
>
>
> On 1/31/07, Aaron <[EMAIL PROTECTED]> wrote:
> >
> > If possible please install the latest HPLIP..
> >
> > A
> >
> > On 1/31/07, Alvaro Proaño < [EMAIL PROTECTED]> wrote:
> >
> > > But are you using a scanner/printer in the parallel port level?
> > >
> > > By the way, 1.6.12 seems to be masked, doesn't it create any
> > > problems. I think that my main problem is the scanner via the parallel
port.
> > >
> > > alvaro_p
> > >
> > > On 1/31/07, Bjørn T Johansen < [EMAIL PROTECTED]> wrote:
> > > >
> > > > You really should upgrade to a newer version...
> > > > I am running 1.6.12 on Gentoo AMD64 and haven't had any
> > > > problems...
> > > >
> > > > BTJ
> > > >
> > > > On Tue, 30 Jan 2007 17:27:07 -0500
> > > > "Alvaro Proaño" < [EMAIL PROTECTED]> wrote:
> > > >
> > > > > i have just installed hplip but my scanning doesn't seem to
> > > > work.
> > > > >
> > > > > I have a HP PSC 500 and the printing works just fine. It's an
> > > > all in
> > > > > one printer (scan, copy, and print)
> > > > >
> > > > > below are:
> > > > >
> > > > > 1 ./check on /usr/share/hplip
> > > > > 2 ./info on /usr/share/hplip
> > > > > 3 /etc/hp/hplip.conf
> > > > > 4 my printer's info
> > > > > 5 ./probe on /usr/share/hplip
> > > > >
> > > > > by the way scanimage -L doesn't show anything.
> > > > >
> > > > > due to this i cannot get my hp-tool started. is there anything
> > > > else I
> > > > > should show you?
> > > > > -----------------------
> > > > >
> > > > > ./check
> > > > >
> > > > > HP Linux Imaging and Printing System (ver. 0.9.7)
> > > > > Dependency/Version Check Utility ver. 1.0
> > > > >
> > > > > Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > This is free software, and you are welcome to distribute it
> > > > > under certain conditions. See COPYING file for more details.
> > > > >
> > > > > Checking Python version...
> > > > > --> Version 2.4.3 installed.
> > > > > --> OK
> > > > > Checking for SIP...
> > > > > --> OK
> > > > > Checking for PyQt...
> > > > > --> OK
> > > > > Checking Qt version...
> > > > > --> Version 3.3.6 installed.
> > > > > --> OK
> > > > > Checking SIP version...
> > > > > --> Version 4.5.2 installed
> > > > > --> OK
> > > > > Checking PyQt version...
> > > > > --> Version 3.17.0 installed.
> > > > > --> OK
> > > > >
> > > > > If any errors or warnings were reported, please refer to the
> > > > > installation instructions for
> > > > > installing dependencies at:
> > > > > http://hpinkjet.sourceforge.net/install.php#setup_env
> > > > >
> > > > > ----------------------------------------
> > > > > ./info
> > > > >
> > > > > HP Linux Imaging and Printing System (ver. 0.9.7)
> > > > > Device Information Utility ver. 3.2
> > > > >
> > > > > Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > This is free software, and you are welcome to distribute it
> > > > > under certain conditions. See COPYING file for more details.
> > > > >
> > > > > [ERROR]: Unable to connect to HPLIP I/O. Please restart HPLIP
> > > > and try again.
> > > > > [ERROR]: Error occured during interactive mode. Exiting.
> > > > > ----------------------------------------
> > > > >
> > > > > /etc/hp/hplip.conf
> > > > >
> > > > > HP Linux Imaging and Printing System (ver. 0.9.7)
> > > > > Dependency/Version Check Utility ver. 1.0
> > > > >
> > > > > Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > # hplips.conf
> > > > >
> > > > > [hpiod]
> > > > > # port=50000 (registered IP port)
> > > > > # port=0 (dynamic IP port)
> > > > > port=0
> > > > >
> > > > > [hpssd]
> > > > > # port=50002
> > > > > port=0
> > > > >
> > > > > [hplip]
> > > > > version=0.9.7
> > > > > jdprobe=0
> > > > >
> > > > > [dirs]
> > > > > home=/usr/share/hplip
> > > > > run=/var/run
> > > > >
> > > > > --------------------------------
> > > > > cups' printers info
> > > > >
> > > > > Make and Model: HP PSC 500 Foomatic/hpijs (recommended)
> > > > > Printer State: idle, accepting jobs, published.
> > > > > Device URI: hp:/par/PSC_500?device=/dev/parport0
> > > > >
> > > > > --------------------------------
> > > > >
> > > > > ./probe
> > > > >
> > > > > HP Linux Imaging and Printing System (ver. 0.9.7)
> > > > > Device Detection (Probe) Utility ver. 1.3
> > > > >
> > > > > Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
> > > > > This software comes with ABSOLUTELY NO WARRANTY.
> > > > > This is free software, and you are welcome to distribute it
> > > > > under certain conditions. See COPYING file for more details.
> > > > >
> > > > > Traceback (most recent call last):
> > > > > File "./probe", line 137, in ?
> > > > > hpssd_sock.connect( ( prop.hpssd_host , prop.hpssd_port ) )
> > > > > File "<string>", line 1, in connect
> > > > > socket.gaierror: (-2, 'Name or service not known')
> > > > >
> > > > >
> > > >
-------------------------------------------------------------------------
> > > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > > Join SourceForge.net's Techsay panel and you'll get the chance
> > > > to share your
> > > > > opinions on IT & business topics through brief surveys - and
> > > > earn cash
> > > > >
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > >
> > > > > _______________________________________________
> > > > > HPLIP-Help mailing list
> > > > > HPLIP-Help@lists.sourceforge.net
> > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > > >
> > > >
> > > >
> > > >
-------------------------------------------------------------------------
> > > > Take Surveys. Earn Cash. Influence the Future of IT
> > > > Join SourceForge.net's Techsay panel and you'll get the chance to
> > > > share your
> > > > opinions on IT & business topics through brief surveys - and earn
> > > > cash
> > > >
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > >
> > > > _______________________________________________
> > > > HPLIP-Help mailing list
> > > > HPLIP-Help@lists.sourceforge.net
> > > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > > >
> > >
> > >
> > >
> > > -------------------------------------------------------------------------
> > > Take Surveys. Earn Cash. Influence the Future of IT
> > > Join SourceForge.net's Techsay panel and you'll get the chance to
> > > share your
> > > opinions on IT & business topics through brief surveys - and earn
> > > cash
> > >
> > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > _______________________________________________
> > > HPLIP-Help mailing list
> > > HPLIP-Help@lists.sourceforge.net
> > > https://lists.sourceforge.net/lists/listinfo/hplip-help
> > >
> > >
> >
> >
> > --
> > I don't care, I'm still free. You can't take the sky from me. -
> > "Firefly"
> > -
> > Ubuntu User: #11105
> > Ubuntu Linux http://ubuntulinux.org
>
>
>
--
I don't care, I'm still free. You can't take the sky from me. - "Firefly"
-
Ubuntu User: #11105
Ubuntu Linux http://ubuntulinux.org
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
HPLIP-Help mailing list
HPLIP-Help@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/hplip-help
