Not sure but all the needed dependency should be installed when emerging hplip...
BTJ On Thu, 1 Feb 2007 16:12:27 -0500 "Alvaro Proaño" <[EMAIL PROTECTED]> wrote: > Ok I just looked at it, and the thing is that when I open xsane I get the > error "no devices found" > > So I did what is described here as telling which device to use. > > I typed: > xsane hpaio:/par/PSC_500?device=/dev/parport0 > > and I get this: "failed to open device > 'hpaio:/par/PSC_500?device=/dev/parport0' Device is busy. > > Bjorn, do I need qt for the hp-toolbox to work perhaps? > > On 2/1/07, Aaron <[EMAIL PROTECTED]> wrote: > > > > So you can print but you can't scan. So the parallel is working. Have > > you looked over this? > > > > http://hplip.sourceforge.net/troubleshooting/scanning.html > > > > A > > > > On 2/1/07, Alvaro Proaño <[EMAIL PROTECTED]> wrote: > > > > > > I think what I am looking for is another parallel por user that oculd > > > help me out here... > > > what do you recommend. > > > > > > On 2/1/07, Bjørn T Johansen < [EMAIL PROTECTED]> wrote: > > > > > > > > Neither, I use the network option.... > > > > > > > > And yes, I use hp-toolbox.... > > > > > > > > > > > > BTJ > > > > > > > > On Thu, 1 Feb 2007 15:29:00 -0500 > > > > "Alvaro Proaño" <[EMAIL PROTECTED] > wrote: > > > > > > > > > your photosmart is USB or Parallel port? > > > > > > > > > > That's why I don't think LSB will fix my stuff. By the way, can you > > > > open > > > > > hp-toolbox? I can't. > > > > > > > > > > On 2/1/07, Bjørn T Johansen < [EMAIL PROTECTED] > wrote: > > > > > > > > > > > > I get 3 errors..: > > > > > > > > > > > > Checking for dependency Reportlab - PDF library for Python... > > > > > > error: Not found! > > > > > > This is an OPTIONAL dependency. Some HPLIP functionality may not > > > > function > > > > > > properly. > > > > > > > > > > > > Which feature is not working because of this? > > > > > > > > > > > > > > > > > > Checking for dependency ppdev - Parallel port support kernel > > > > module.... > > > > > > error: Not found! > > > > > > This is an OPTIONAL dependency. Some HPLIP functionality may not > > > > function > > > > > > properly. > > > > > > > > > > > > > > > > > > Checking for dependency LSB - Linux Standard Base support... > > > > > > error: Not found! > > > > > > error: This is a REQUIRED dependency. Please make sure that this > > > > > > dependency is installed before installing or running HPLIP. > > > > > > > > > > > > > > > > > > Not sure why LSB is a required dependency, because printing and > > > > scanning > > > > > > with my Photosmart 3300 works as it should... > > > > > > > > > > > > > > > > > > BTJ > > > > > > > > > > > > On Thu, 1 Feb 2007 15:13:33 -0500 > > > > > > "Alvaro Proaño" < [EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > Could you please run hp-check to see if you get these errors to > > > > know > > > > > > that > > > > > > > perhaps with these errors it could still work. I think that my > > > > problem > > > > > > is > > > > > > > not my driver but the scanner, the printer works marvelously. > > > > > > > > > > > > > > Acoording to http://gentoo-portage.com/sys-apps/lsb-release > > > > lsb-release > > > > > > only > > > > > > > has an ebuild made for x86, I'm not sure if i want ot get away > > > > from > > > > > > portage > > > > > > > tree. > > > > > > > > > > > > > > > > > > > > > On 2/1/07, Bjørn T Johansen < [EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > I don't have LSB installed... But there exist an ebuild that > > > > looks > > > > > > like > > > > > > > > this (not sure if this is the right one)..: > > > > > > > > > > > > > > > > sys-apps/lsb-release [ Masked ] > > > > > > > > Latest version available: 1.4 > > > > > > > > Latest version installed: [ Not Installed ] > > > > > > > > Size of files: 10 kB > > > > > > > > Homepage: http://www.linuxbase.org/ > > > > > > > > Description: LSB version query program > > > > > > > > License: GPL-2 > > > > > > > > > > > > > > > > But as you see, this is not installed... All I did was emerge > > > > hplip, > > > > > > with > > > > > > > > these USE flags..: > > > > > > > > > > > > > > > > Calculating dependencies... done! > > > > > > > > [ebuild R ] net-print/hplip-1.6.12 USE="X foomaticdb ppds > > > > qt3 > > > > > > scanner > > > > > > > > snmp" 10,525 kB > > > > > > > > > > > > > > > > But I have never run hp-check.... > > > > > > > > > > > > > > > > > > > > > > > > BTJ > > > > > > > > > > > > > > > > On Thu, 1 Feb 2007 14:16:34 -0500 > > > > > > > > "Alvaro Proaño" < [EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > Bjørn T Johansen how did you install LSB, since there are no > > > > ebuilds > > > > > > for > > > > > > > > > amd64 at the moment in the portage. > > > > > > > > > > > > > > > > > > Aaron, i am using gentoo, i dont use apt-get. > > > > > > > > > > > > > > > > > > On 2/1/07, Aaron < [EMAIL PROTECTED] > wrote: > > > > > > > > > > > > > > > > > > > > It looks like you are missing LSB which will make the > > > > hplip > > > > > > daemons > > > > > > > > not > > > > > > > > > > run correctly. Install lsb > > > > > > > > > > > > > > > > > > > > su > > > > > > > > > > apt-get install lsb > > > > > > > > > > then > > > > > > > > > > /etc/init.d/hplip restart > > > > > > > > > > /etc/init.d/cupsys restart > > > > > > > > > > > > > > > > > > > > Then re-run hp-check and post the output. > > > > > > > > > > > > > > > > > > > > A > > > > > > > > > > > > > > > > > > > > On 2/1/07, Alvaro Proaño <[EMAIL PROTECTED] > wrote: > > > > > > > > > > > > > > > > > > > > > > Are there any other HP PSC 500 or ALL-In-ONE users that > > > > have > > > > > > both > > > > > > > > their > > > > > > > > > > > printer/scanner in the parallel port! > > > > > > > > > > > > > > > > > > > > > > I need their help!!! > > > > > > > > > > > > > > > > > > > > > > On 1/31/07, Alvaro Proaño <[EMAIL PROTECTED] > wrote: > > > > > > > > > > > > > > > > > > > > > > > > I just installed the new hp-lip and I just did > > > > hp-check and I > > > > > > get > > > > > > > > 2 > > > > > > > > > > > > errors. How do I fix these? How do I do the scan work! > > > > > > > > > > > > > > > > > > > > > > > > > > > > HP Linux Imaging and Printing System (ver. 1.6.12) > > > > > > > > > > > > Dependency/Version Check Utility ver. 5.2 > > > > > > > > > > > > > > > > > > > > > > > > Copyright (c) 2003-6 Hewlett-Packard Development > > > > Company, LP > > > > > > > > > > > > This software comes with ABSOLUTELY NO WARRANTY. > > > > > > > > > > > > This is free software, and you are welcome to > > > > distribute it > > > > > > > > > > > > under certain conditions. See COPYING file for more > > > > details. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------- > > > > > > > > > > > > | SYSTEM INFO | > > > > > > > > > > > > --------------- > > > > > > > > > > > > > > > > > > > > > > > > Basic system information: > > > > > > > > > > > > Linux misantropo 2.6.18-gentoo-r6 #1 SMP Fri Jan 26 > > > > 19:45:18 > > > > > > PET > > > > > > > > 2007 > > > > > > > > > > > > x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD > > > > > > GNU/Linux > > > > > > > > > > > > > > > > > > > > > > > > Detected distro (/etc/issue): > > > > > > > > > > > > mepis 0.0 > > > > > > > > > > > > > > > > > > > > > > > > Detected distro (lsb_release): > > > > > > > > > > > > error: lsb_release not found. > > > > > > > > > > > > > > > > > > > > > > > > Currently installed HPLIP version... > > > > > > > > > > > > HPLIP 1.6.12 currently installed in > > > > '/usr/share/hplip'. > > > > > > > > > > > > > > > > > > > > > > > > Current contents of '/etc/hp/hplip.conf' file: > > > > > > > > > > > > # hplip.conf > > > > > > > > > > > > > > > > > > > > > > > > [hpiod] > > > > > > > > > > > > # port=0 (dynamic IP port) > > > > > > > > > > > > port=2208 > > > > > > > > > > > > [hpssd] > > > > > > > > > > > > # port=0 (dynamic IP port) > > > > > > > > > > > > port=2207 > > > > > > > > > > > > > > > > > > > > > > > > [hplip] > > > > > > > > > > > > version=1.6.12 > > > > > > > > > > > > jdprobe=0 > > > > > > > > > > > > > > > > > > > > > > > > [dirs] > > > > > > > > > > > > home=/usr/share/hplip > > > > > > > > > > > > run=/var/run > > > > > > > > > > > > ppd=/usr/share/ppd/HP > > > > > > > > > > > > doc=/usr/share/doc/hplip-1.6.12 > > > > > > > > > > > > > > > > > > > > > > > > # Following values are determined at configure time > > > > and cannot > > > > > > be > > > > > > > > > > > > changed. > > > > > > > > > > > > [configure] > > > > > > > > > > > > network-build=1 > > > > > > > > > > > > pp-build=1 > > > > > > > > > > > > gui-build=1 > > > > > > > > > > > > scanner-build=1 > > > > > > > > > > > > fax-build=1 > > > > > > > > > > > > installinitd= > > > > > > > > > > > > chkconfig= > > > > > > > > > > > > internal-tag= 1.6.12.15 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > HPLIP running? > > > > > > > > > > > > No, HPLIP is not running (OK). > > > > > > > > > > > > > > > > > > > > > > > > HPOJ running? > > > > > > > > > > > > No, HPOJ is not running (OK). > > > > > > > > > > > > > > > > > > > > > > > > Checking Python version... > > > > > > > > > > > > OK, version 2.4.3 installed > > > > > > > > > > > > > > > > > > > > > > > > Checking PyQt version... > > > > > > > > > > > > OK, version 3.17 installed. > > > > > > > > > > > > > > > > > > > > > > > > Checking SIP version... > > > > > > > > > > > > OK, Version 4.5.2 installed > > > > > > > > > > > > > > > > > > > > > > > > ---------------- > > > > > > > > > > > > | DEPENDENCIES | > > > > > > > > > > > > ---------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency libcrypto - OpenSSL > > > > cryptographic > > > > > > > > library... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency gcc - GNU Project C and C++ > > > > > > Compiler... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency SANE - Scanning library... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency GhostScript - PostScript and > > > > PDF > > > > > > language > > > > > > > > > > > > interpreter and previewer... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency libjpeg - JPEG library... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency libpthread - POSIX threads > > > > library... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency make - GNU make utility to > > > > maintain > > > > > > groups > > > > > > > > of > > > > > > > > > > > > programs... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency python-devel - Python > > > > development > > > > > > files... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency Reportlab - PDF library for > > > > Python... > > > > > > > > > > > > error: Not found! > > > > > > > > > > > > This is an OPTIONAL dependency. Some HPLIP > > > > functionality may > > > > > > not > > > > > > > > > > > > function properly. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency PyQt - Qt interface for > > > > Python... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency cups-devel- Common Unix > > > > Printing > > > > > > System > > > > > > > > > > > > development files... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency ppdev - Parallel port support > > > > kernel > > > > > > > > > > > > module.... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency libusb - USB library... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency scanimage - Shell scanning > > > > program... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency libnetsnmp-devel - SNMP > > > > networking > > > > > > library > > > > > > > > > > > > development files... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency Python 2.2 or greater - Python > > > > > > programming > > > > > > > > > > > > language... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency LSB - Linux Standard Base > > > > support... > > > > > > > > > > > > error: Not found! > > > > > > > > > > > > error: This is a REQUIRED dependency. Please make sure > > > > that > > > > > > this > > > > > > > > > > > > dependency is installed before installing or running > > > > HPLIP. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency xsane - Graphical scanner > > > > frontend for > > > > > > > > SANE... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency cups - Common Unix Printing > > > > System... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking for dependency Python 2.3 or greater - > > > > Required for > > > > > > fax > > > > > > > > > > > > functionality... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------- > > > > > > > > > > > > | INSTALLED PRINTERS | > > > > > > > > > > > > ---------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > hp_par_PSC_500 > > > > > > > > > > > > -------------- > > > > > > > > > > > > Device URI: hp:/par/PSC_500?device=/dev/parport0 > > > > > > > > > > > > Installed in HPLIP? Yes > > > > > > > > > > > > PPD: /etc/cups/ppd/hp_par_PSC_500.ppd > > > > > > > > > > > > PPD Description: HP PSC 500 Foomatic/hpijs > > > > (recommended) > > > > > > > > > > > > Printer status: printer hp_par_PSC_500 is > > > > idle. enabled since > > > > > > Tue > > > > > > > > Jan > > > > > > > > > > > > 30 16:18:15 2007 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------- > > > > > > > > > > > > | SANE CONFIGURATION | > > > > > > > > > > > > ---------------------- > > > > > > > > > > > > > > > > > > > > > > > > 'hpaio' in /etc/sane.d/dll.conf'... > > > > > > > > > > > > OK, found. SANE backend 'hpaio' is properly set up. > > > > > > > > > > > > > > > > > > > > > > > > Checking output of 'scanimage -L'... > > > > > > > > > > > > > > > > > > > > > > > > No scanners were identified. If you were expecting > > > > something > > > > > > > > > > > > different, > > > > > > > > > > > > check that the scanner is plugged in, turned on and > > > > detected > > > > > > by > > > > > > > > the > > > > > > > > > > > > sane-find-scanner tool (if appropriate). Please read > > > > the > > > > > > > > documentation > > > > > > > > > > > > > > > > > > > > > > > > which came with this software (README, FAQ, manpages). > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > --------------------- > > > > > > > > > > > > | PYTHON EXTENSIONS | > > > > > > > > > > > > --------------------- > > > > > > > > > > > > > > > > > > > > > > > > Checking 'cupsext' CUPS extension... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > Checking 'pcardext' Photocard extension... > > > > > > > > > > > > OK, found. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 2 errors were detected. > > > > > > > > > > > > Please refer to the installation instructions at: > > > > > > > > > > > > http://hplip.sourceforge.net/install/index.html > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 1/31/07, Aaron <[EMAIL PROTECTED] > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > If possible please install the latest HPLIP.. > > > > > > > > > > > > > > > > > > > > > > > > > > A > > > > > > > > > > > > > > > > > > > > > > > > > > On 1/31/07, Alvaro Proaño < [EMAIL PROTECTED]> > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > But are you using a scanner/printer in the > > > > parallel port > > > > > > > > level? > > > > > > > > > > > > > > > > > > > > > > > > > > > > By the way, 1.6.12 seems to be masked, doesn't it > > > > create > > > > > > any > > > > > > > > > > > > > > problems. I think that my main problem is the > > > > scanner via > > > > > > the > > > > > > > > parallel port. > > > > > > > > > > > > > > > > > > > > > > > > > > > > alvaro_p > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 1/31/07, Bjørn T Johansen < [EMAIL PROTECTED]> > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > You really should upgrade to a newer version... > > > > > > > > > > > > > > > I am running 1.6.12 on Gentoo AMD64 and haven't > > > > had any > > > > > > > > > > > > > > > problems... > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > BTJ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, 30 Jan 2007 17:27:07 -0500 > > > > > > > > > > > > > > > "Alvaro Proaño" < [EMAIL PROTECTED]> wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > i have just installed hplip but my scanning > > > > doesn't > > > > > > seem > > > > > > > > to > > > > > > > > > > > > > > > work. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I have a HP PSC 500 and the printing works > > > > just fine. > > > > > > It's > > > > > > > > an > > > > > > > > > > > > > > > all in > > > > > > > > > > > > > > > > one printer (scan, copy, and print) > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > below are: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 1 ./check on /usr/share/hplip > > > > > > > > > > > > > > > > 2 ./info on /usr/share/hplip > > > > > > > > > > > > > > > > 3 /etc/hp/hplip.conf > > > > > > > > > > > > > > > > 4 my printer's info > > > > > > > > > > > > > > > > 5 ./probe on /usr/share/hplip > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > by the way scanimage -L doesn't show anything. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > due to this i cannot get my hp-tool started. > > > > is there > > > > > > > > anything > > > > > > > > > > > > > > > else I > > > > > > > > > > > > > > > > should show you? > > > > > > > > > > > > > > > > ----------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ./check > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > HP Linux Imaging and Printing System (ver. > > > > 0.9.7) > > > > > > > > > > > > > > > > Dependency/Version Check Utility ver. 1.0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Copyright (c) 2003-5 Hewlett-Packard > > > > Development > > > > > > Company, > > > > > > > > LP > > > > > > > > > > > > > > > > This software comes with ABSOLUTELY NO > > > > WARRANTY. > > > > > > > > > > > > > > > > This is free software, and you are welcome to > > > > > > > > > > distribute > > > > > > > > it > > > > > > > > > > > > > > > > under certain conditions. See COPYING file > > > > for more > > > > > > > > details. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Checking Python version... > > > > > > > > > > > > > > > > --> Version 2.4.3 installed. > > > > > > > > > > > > > > > > --> OK > > > > > > > > > > > > > > > > Checking for SIP... > > > > > > > > > > > > > > > > --> OK > > > > > > > > > > > > > > > > Checking for PyQt... > > > > > > > > > > > > > > > > --> OK > > > > > > > > > > > > > > > > Checking Qt version... > > > > > > > > > > > > > > > > --> Version 3.3.6 installed. > > > > > > > > > > > > > > > > --> OK > > > > > > > > > > > > > > > > Checking SIP version... > > > > > > > > > > > > > > > > --> Version 4.5.2 installed > > > > > > > > > > > > > > > > --> OK > > > > > > > > > > > > > > > > Checking PyQt version... > > > > > > > > > > > > > > > > --> Version 3.17.0 installed. > > > > > > > > > > > > > > > > --> OK > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > If any errors or warnings were reported, > > > > please refer > > > > > > to > > > > > > > > the > > > > > > > > > > > > > > > > installation instructions for > > > > > > > > > > > > > > > > installing dependencies at: > > > > > > > > > > > > > > > > http://hpinkjet.sourceforge.net/install.php#setup_env > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ---------------------------------------- > > > > > > > > > > > > > > > > ./info > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > HP Linux Imaging and Printing System (ver. > > > > 0.9.7) > > > > > > > > > > > > > > > > Device Information Utility ver. 3.2 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Copyright (c) 2003-5 Hewlett-Packard > > > > Development > > > > > > Company, > > > > > > > > LP > > > > > > > > > > > > > > > > This software comes with ABSOLUTELY NO > > > > WARRANTY. > > > > > > > > > > > > > > > > This is free software, and you are welcome to > > > > > > distribute > > > > > > > > it > > > > > > > > > > > > > > > > under certain conditions. See COPYING file > > > > for more > > > > > > > > details. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [ERROR]: Unable to connect to HPLIP I/O. > > > > Please > > > > > > restart > > > > > > > > HPLIP > > > > > > > > > > > > > > > and try again. > > > > > > > > > > > > > > > > [ERROR]: Error occured during interactive > > > > mode. > > > > > > Exiting. > > > > > > > > > > > > > > > > ---------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > /etc/hp/hplip.conf > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > HP Linux Imaging and Printing System (ver. > > > > 0.9.7) > > > > > > > > > > > > > > > > Dependency/Version Check Utility ver. 1.0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Copyright (c) 2003-5 Hewlett-Packard > > > > Development > > > > > > Company, > > > > > > > > LP > > > > > > > > > > > > > > > > This software comes with ABSOLUTELY NO > > > > WARRANTY. > > > > > > > > > > > > > > > > # hplips.conf > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [hpiod] > > > > > > > > > > > > > > > > # port=50000 (registered IP port) > > > > > > > > > > > > > > > > # port=0 (dynamic IP port) > > > > > > > > > > > > > > > > port=0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [hpssd] > > > > > > > > > > > > > > > > # port=50002 > > > > > > > > > > > > > > > > port=0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [hplip] > > > > > > > > > > > > > > > > version= 0.9.7 > > > > > > > > > > > > > > > > jdprobe=0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > [dirs] > > > > > > > > > > > > > > > > home=/usr/share/hplip > > > > > > > > > > > > > > > > run=/var/run > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------- > > > > > > > > > > > > > > > > cups' printers info > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Make and Model: HP PSC 500 Foomatic/hpijs > > > > > > (recommended) > > > > > > > > > > > > > > > > Printer State: idle, accepting jobs, > > > > published. > > > > > > > > > > > > > > > > Device URI: > > > > hp:/par/PSC_500?device=/dev/parport0 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ./probe > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > HP Linux Imaging and Printing System (ver. > > > > 0.9.7) > > > > > > > > > > > > > > > > Device Detection (Probe) Utility ver. 1.3 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Copyright (c) 2003-5 Hewlett-Packard > > > > Development > > > > > > Company, > > > > > > > > LP > > > > > > > > > > > > > > > > This software comes with ABSOLUTELY NO > > > > WARRANTY. > > > > > > > > > > > > > > > > This is free software, and you are welcome to > > > > > > > > > > distribute > > > > > > > > it > > > > > > > > > > > > > > > > under certain conditions. See COPYING file > > > > for more > > > > > > > > details. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Traceback (most recent call last): > > > > > > > > > > > > > > > > File "./probe", line 137, in ? > > > > > > > > > > > > > > > > hpssd_sock.connect( ( prop.hpssd_host , > > > > > > > > prop.hpssd_port ) > > > > > > > > > > > > > > > ) > > > > > > > > > > > > > > > > File "<string>", line 1, in connect > > > > > > > > > > > > > > > > socket.gaierror: (-2, 'Name or service not > > > > known') > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > > > > > > > > > > > > > Take Surveys. Earn Cash. Influence the Future > > > > of IT > > > > > > > > > > > > > > > > Join SourceForge.net's Techsay panel and > > > > you'll get > > > > > > the > > > > > > > > chance > > > > > > > > > > > > > > > to share your > > > > > > > > > > > > > > > > opinions on IT & business topics through brief > > > > surveys > > > > > > - > > > > > > > > and > > > > > > > > > > > > > > > earn cash > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > HPLIP-Help mailing list > > > > > > > > > > > > > > > > HPLIP-Help@lists.sourceforge.net > > > > > > > > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > > > > > > > > > > > > Take Surveys. Earn Cash. Influence the Future of > > > > IT > > > > > > > > > > > > > > > Join SourceForge.net's Techsay panel and you'll > > > > get the > > > > > > > > chance > > > > > > > > > > > > > > > to share your > > > > > > > > > > > > > > > opinions on IT & business topics through brief > > > > surveys - > > > > > > and > > > > > > > > > > > > > > > earn cash > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > HPLIP-Help mailing list > > > > > > > > > > > > > > > HPLIP-Help@lists.sourceforge.net > > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > > > > > > > > > > > Take Surveys. Earn Cash. Influence the Future of > > > > IT > > > > > > > > > > > > > > Join SourceForge.net's Techsay panel and you'll > > > > get the > > > > > > chance > > > > > > > > to > > > > > > > > > > > > > > share your > > > > > > > > > > > > > > opinions on IT & business topics through brief > > > > surveys - > > > > > > and > > > > > > > > earn > > > > > > > > > > > > > > cash > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > HPLIP-Help mailing list > > > > > > > > > > > > > > HPLIP-Help@lists.sourceforge.net > > > > > > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/hplip-help > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > > I don't care, I'm still free. You can't take the > > > > sky from > > > > > > me. - > > > > > > > > > > > > > "Firefly" > > > > > > > > > > > > > - > > > > > > > > > > > > > Ubuntu User: #11105 > > > > > > > > > > > > > Ubuntu Linux http://ubuntulinux.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > I don't care, I'm still free. You can't take the sky from > > > > me. - > > > > > > > > "Firefly" > > > > > > > > > > - > > > > > > > > > > Ubuntu User: #11105 > > > > > > > > > > Ubuntu Linux http://ubuntulinux.org > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > I don't care, I'm still free. You can't take the sky from me. - "Firefly" > > - > > Ubuntu User: #11105 > > Ubuntu Linux http://ubuntulinux.org > > ------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier. Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ HPLIP-Help mailing list HPLIP-Help@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/hplip-help
