Jim, the rundig.log files on UX10 and UX11 look similar. Rundig finishes within 10 second, it's a small test-site. Some URL's are rejected (URL not in the limits), some are processed. htmerge is started (old db is empty) and removes some documents (not all). htmerge ends with:
htmerge: 600:routers htmerge: Discarding testpdf in doc #10 htmerge: 700:unix htmerge: Discarding unixsystemha in doc #8 htmerge: 800:zoekmachine DB2 problem...: unrecognized file type htmerge: Document database has no URLs. Check your config file and try running h tdig again. Personally, I think the key is finding out what causes the htdig program to create db-filesizes to be greater than the filesystem. It must A library problem? #ll total 76 -rw-r--r-- 1 dnzbehr users 2080249424 Jul 18 07:26 db.docdb -rw-r--r-- 1 dnzbehr users 29466 Jul 18 07:26 db.wordlist These files are generated by htdig, so htdig has a problem. I do not use htnotify or htfuzzy. I don't need them (yet). Thanks for your reaction. Jeroen P. -----Oorspronkelijk bericht----- Van: Jim Cole [mailto:[EMAIL PROTECTED]] Verzonden: donderdag 18 juli 2002 0:47 Aan: [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Onderwerp: Re: [htdig] No htdig on HP-UX 11.0? [EMAIL PROTECTED]'s bits of Wed, 17 Jul 2002 translated to: >Running htdig just fails. >- I use the same config file as on HP-UX 10.20. >- I removed all pdf-files... >- All db-files but db.wordlist are larger than the filesystem. >- Rundig -vvv ends with error message: DB2 problem...: unrecognized file >type. >- rundig.log looks fine What do you mean by "looks fine"? Can you tell for certain that it is only retrieving the small number of documents that you expect to be indexed? One of the things that it important to eliminate is the possibility that it indexing outside of the intended limits or getting stuck in some sort of loop involving symbolic links, bad HTML, etc. Perhaps you have checked this and this is what you mean by "looks fine". Just checking :) >Any suggestions? >- Compile with debugging (how do you do that) >- HP Ansi-C compiler? >- Give it up? You might want to take a look at the way rundig works and try running the components manually, one at a time. In particular, run htdig and check to see if the generated files appear to be a reasonable size. Then move on to htmerge, and do the same. If things still look reasonable, move on to htnotify, and if appropriate, htfuzzy. This is of course not likely to fix anything, but it might further narrow down where the problem is occurring. Jim Disclaimer ************************************************************************ Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is uitsluitend bestemd voor de geadresseerde. Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te vernietigen en de afzender te informeren. Wij adviseren u om bij twijfel over de juistheid of de volledigheid van de mail contact met afzender op te nemen. ************************************************************************ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ htdig-general mailing list <[EMAIL PROTECTED]> To unsubscribe, send a message to <[EMAIL PROTECTED]> with a subject of unsubscribe FAQ: http://htdig.sourceforge.net/FAQ.html
