I have a similar work flow and wrote a little patch to help out: http://ultrawide.wordpress.com/2008/11/16/hacking-hugin-part-1/
There are a few extra buttons on the images tab that will swap the images with the one numerically above or below it, while keeping the CPs in the same place. Then you can quickly save the project and send to batch, and repeat for each bracketed set. I found this to be a lot safer than applying template as you would have to manually select all the images again, and if you have lots of images in each pano and lots of bracketed sets then there's plenty of room to make a mistake. With my patch the correct images are selected with a single click. Tim Seb Perez-D wrote: > I have a similar but more automatic approach. I create the pto project > file for one exposure, and then use a custom script to generate the > panoramas for the different exposures. One feature of nona is very > useful: you can pass the names of the images on the command line and > it will use those images instead of the ones in the pto file. What the > script does is to increase the number in the filename of the images. > > An alternative would be to use the "Apply template" in Hugin (in the > File menu), which reuses the settings of another pto file. You could > then use ptomerge > (http://search.cpan.org/dist/Panotools-Script/bin/ptomerge) to merge > these different exposures into one. > > Cheers, > > Seb > > On Thu, Sep 3, 2009 at 12:16, Eduardo Perez > Esteban<[email protected]> wrote: >> I guess you are doing HDR panoramas, aren't you? Me too, but I take a >> completely different approach: instead of passing all the images to Hugin, I >> make a separate panorama for each exposure, and merge them afterwards; when >> the exposures are aligned, the control points and optimizations can be >> shared, I just change the images. >> >> My workflow is: >> >> * Copy the files from the first exposure to IMG1, IMG2, ..., IMGn (actually, >> I use symbolic links in Linux, but Windows users will probably have to copy >> the files). >> * Open IMG1, IMG2, ..., IMGn with Hugin, create the control points, >> optimize, ...; save the project and create a panorama named PANO1. >> * Now copy the files from the second exposure over IMG1, IMG2, ..., IMGn; >> execute the project again, but save the result to PANO2. >> * Repeat for each exposure, and you will obtain a set of bracketed panoramas >> PANO1, PANO2, ..., PANOn. >> * Do all the HDR work. >> >> Hope this helps. >> >> On Thu, Sep 3, 2009 at 10:19 AM, RueiKe <[email protected]> wrote: >>> I am looking for ways to simplify some of my more complex projects >>> which could be 217 images connected by >10,000 control points. In >>> these cases I am doing 7 shot brackets for 31 images for full 360 x >>> 180 degree pano. >>> >>> Seems like control points would be greatly simplified if I could just >>> get hugin to assume the bracketed images were already aligned. I have >>> done a case where I just picked alignment points on the 4 corners of a >>> few photos and it seemed to work fine. Is this a reasonable >>> approach? Would it be possible to have an option to add a set of >>> fixed control points for a specified set of aligned images? >>> >>> Thanks, >>> Rick >>> > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
