I have a set of images, named sequentially, 0000 to 0020. I took them in order, starting at one point on the horizon and rotating until I reached the same point. I expect Hugin to stitch the images together in this order, and I set image 0000 as the anchor point for position. I then try stitching the photos together, manually or automatically, and the two images 0000 and 0020 (which I expect to be on either side of the image) are stitched together and end up somewhere in the middle of the image, so that the actual order of the images in the final panoramic is not 0000-0001-0002-...-0020, but is in fact 0018-0019-0020-0000-0001-0002-...
What's really confusing to me is that I experience this problem with 2 sets of photos, but not with a third set of photos, so I can't figure out what I'm doing right with the one that works or wrong with the two that don't. Is there any way to force Hugin to start the panoramic with a specific photo (in this case photo 0000)? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx -~----------~----~----~----~------~----~------~--~---
