On 3 Nov., 16:29, "Bruno Postle" <[email protected]> wrote: > (Apologies my phone won't let me quote properly) > > If your bracketed sets are not well aligned there is no need to save the > intermediate files and blend them manually. > > Hugin has two exposure fusion modes: 'fused and blended' fuses stacks > together first then seam blends the result, > this requires the stacks to be approximately aligned, i.e. handheld using an > SLR bracketing mode is fine; the other > 'blended and fused' mode is what you need if you want to do exposure fusion > but don't have identifiable stacks.
My mistake. I had actually tried my assumption, but all the images I used for the test had an EV value of 0. In that case hugin assumed there was nothing to enfuse, the images being all equally exposed, and just enblended them. The 'blended and fused' mode Bruno refers to has been renamed recently and is now called 'Exposure fused from any arrangement', so if you are using a very recent version, that's the one you want. Let me stress that your differently exposed images need EV values, whether they are in your photos or whether you set them manually. Hugin will then stitch similarly exposed images together into layers and enfuse these layers. If you don't have similarly exposed images to make up layers to be subsequentially enfused and still want to enfuse them all, they should all have different EV values - I tried with 0, 1, 2 etc. and it worked. Of course you can still do it manually as I wrote in my previous post ;) with regards Kay -- You received this message because you are subscribed to the Google Groups "Hugin and other free panoramic software" group. A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/hugin-ptx
