Good idea. I saved the questionable masks, gaussian-blurred them with 64 
pixels radius (2^6 should correspond to level 6) and reinserted them. The 
results were exactly as I was hoping - a smooth transition that hid the 
seam. If I used too large blur radius (tried up to 512) there were problems 
when the original seams were too close to the edge of the image (or image's 
alpha channel limits) so I had to be more generous when masking unwanted 
parts. Some ghosting problems appeared peripherally but I just cloned the 
good parts I needed into the old image. The same examples as before now 
look like this improved:

http://www.elmuseum.se/temp/stitchseam1_maskblur64.jpg
http://www.elmuseum.se/temp/stitchseam2_maskblur64.jpg

Here are the final panoramas:

http://www.elmuseum.se/panorama/panorama.html?pano=asea_kulvert.xml
(Nightmarish 4-hour photo session in pitch black culvert wearing 
particulate mask. About 130 focus stacked half-minute exposures in total. I 
was hell-bent on doing this as a personal challenge).

http://www.elmuseum.se/panorama/panorama.html?pano=vasteras_gamla_vattentorn.xml
(Seams not yet fixed here as of writing this but hardly visible in this 
magnification anyway)

-- 
A list of frequently asked questions is available at: 
http://wiki.panotools.org/Hugin_FAQ
--- 
You received this message because you are subscribed to the Google Groups 
"hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/hugin-ptx/a5c0bd0d-a0b3-4e29-b82c-a1e09ef1dfc5%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Reply via email to