Hello Hans,
On Sun, 31 Aug 2014 16:21:05 +1000, Hans Bull <[email protected]> wrote:
Hello Terry,
I thought I included the pto :( but I didn't. Sorry.
Here it
is:
https://www.dropbox.com/s/dkw4jgioevv8o3c/_DSC7681-_DSC7689___x.pto?dl=0
And here the stiched image w/o
problems:
https://www.dropbox.com/s/1ha2vhsdjwjltmp/_DSC7681-_DSC7689___x.jpg?dl=0
The fused one should be included in the archive.
OK, I have run your .pto and produced a stitch using "exposure fused from
any arrangement", and the result does seem to be sharp, but there are a
couple of points about this.
My stitch can be found here ...
https://dl.dropboxusercontent.com/u/36440732/_DSC7681-_DSC7689___xfaa_blended_fused.jpg
Firstly, you didn't provide image _DSC7681-0.JPG, so I used a dummy image
to open your .pto in hugin and did the stitch with that image deselected,
so it is possible that image may be influencing your result.
Secondly, it looks as though you have shot these images as a normal
pano...i.e. from the one location, and your control points have the
appearance of being auto generated. In these circumstances one wouldn't
normally optimise the translation parameters (x,y,z).
If you want to optimise x,y,z, control points should be confined to a
plane surface (e.g. all on a wall), which does appear to be possible for
these images, but your set does include control points that are clearly
not in the same plane as the majority of your points.
Finally, I have used hugin-2014.1.0.
Have another look at this project with image 7681 deselected and see if
you still have the same sharpness problem.
Cheers,
--
Regards,
Terry Duell
--
A list of frequently asked questions is available at:
http://wiki.panotools.org/Hugin_FAQ
---
You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/hugin-ptx/op.xlf2ywyurs0ygh%40localhost.
For more options, visit https://groups.google.com/d/optout.
