Thank you for the info. I will try the suggestions from the link you provided, maybe it will be a fit (or at least good enough) for my case also, since I only use the `a` and `c` parameters. Any idea if my method for calculating `focal_pixels` is correct?
On Monday, October 16, 2017 at 8:31:43 PM UTC+3, T. Modes wrote: > > > > Am Montag, 16. Oktober 2017 14:38:36 UTC+2 schrieb Iacovlev Pavel: >> >> My challenge: >> >> Can someone point me into the right direction to figure out how to >> properly calculate/convert `focal_pixels` and the `k1, k2, k3, k4` >> parameters ? >> >> k1 - Most likely corresponds to `c` pto value. In Hugin this parameter is >> called: Radial distortion (c). >> >> k2 - Most likely corresponds to `a` pto value. In Hugin this parameter is >> called: Radial distortion (a). >> >> k3 - >> >> k4 - >> > > This was already discussed. Short answer: this is not easily possible (and > there is no 1:1 correspondence). see > https://groups.google.com/d/msg/hugin-ptx/-r-yk8zI6Gs/p-1BP-ihBQAJ > > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/93f1ac9b-6778-46ea-87f7-9db0d56f9d5b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
