If you watch the scene from a different position you see different things. No algorithm can undo that.
If there is enough overlap between the sensors what you can try is to find an object in the overlapping section that is sufficiently similar in all photographs and switch from one sensor to the other there. Which might break the consistence of the rest of the image: for objects in a different depth your 360° panorama will have 340 or 380°. Control points don't lie so they tell inconsistent camera angles and positions and near to the object you switch cameras things might disappear, get doubled or get way too wide or too narrow. My guess the sensor's algorithm will skip trying to use control points in order to determine the relative position of the cameras: it only needs to be done once. In hugin you can stitch one image and then just replace the image files for the next set of images in order to do so. Switching between images in the Right Place in hugin can be done using masks. It will automatically fine-tune the border within the remaining overlapping section between images. Am Mi., 14. Nov. 2018, 18:22 hat <giuseppe.porci...@gmail.com> geschrieben: > Hi, > > I am new to this forum. > I am planning to set a rig of six small cameras to take panos. > The distance between the nodal points of each cam is known, > As far as I know there is no way to solve this parallax error in stitching > the images in Hugin, except in some particular cases. > I also read that some manufacterers of 360 degree cameras consisting of a > number of sensors and lenses claim their included stitching software can, > partially, deal with the parallax error. > My question is: > is there any exhisting algorithms which may (or which is scheduled to) be > included in Hugin for the above purpose? > > Thank you. > > Best regards, > > Giuseppe > > -- > A list of frequently asked questions is available at: > http://wiki.panotools.org/Hugin_FAQ > --- > You received this message because you are subscribed to the Google Groups > "hugin and other free panoramic software" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hugin-ptx+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/hugin-ptx/a4bc8d44-30e9-4146-8069-fbcebaf132e0%40googlegroups.com > <https://groups.google.com/d/msgid/hugin-ptx/a4bc8d44-30e9-4146-8069-fbcebaf132e0%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CAMcFxV1MrfCzct%2BKRsO0CuOpiKU2K8zE%3DNXheT2sko_K1KAsyw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
