You can manually place the zenith shot. In Expert Mode, under Geometric Optimisation choose Custom Parameters. This will bring enable the Optimizer tab. You can then manually enter the desired yaw, pitch, and roll parameters of the zenith shot.
>From your example, I'm not sure your lens is wide enough to cover the zenith. What's the camera, lens, and shot pattern you're using? On Monday, 7 March 2022 at 02:15:49 UTC [email protected] wrote: > Peoples, > I have a nice panorama made of 12 shots; 6 shots horizontaly slightly > down, 6 shots horizontaly slightly up. > https://i.imgur.com/H3RZtiO.jpg > I have one more shot of the zenith with the same lens. It should fill the > hole in the panorama. How can I blend that shot in? > I would like to tell Hugin that the shot is vertical, with the same lens. > Eventually correct the azimuth somewhat and then have Hugin blend it in. > Thanks in advance ;) > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/641010bf-5751-4e68-a65b-615b37fa86c2n%40googlegroups.com.
