Someone asked something similar here: https://groups.google.com/g/hugin-ptx/c/WF4WKBYF3xc The procedure is almost the same as when you stitch images from a scanner.
Since the camera is moving for every picture, you would need to assign a different lens to each of the images (select each image, right click and select* Lens > New Lens)*, and set the *geometry* optimization to custom parameters. In the Optimizer right click on *camera translation* and set it to *"select al*l". But the main issue you are going to find using street view is that from one photo to the next the camera will have moved a few meters, and the perspective of the buildings depicted will be different. On Wednesday, November 1, 2023 at 10:32:44 AM UTC-7 S Ansley wrote: > Hello, > > I'm interested in using Hugin to try to generate backdrops for a model > railroad. Scale is 'N', so eventually I'll hopefully end up with an > image perhaps 200mm / 8" high and 2.4m / 8' or more long which can be > printed, trimmed of sky etc, and then stuck to the backboard. > > Source pictures would be from Streetview. An example I'm playing with is > the Paper mill located on Point Basse Ave, Nekoosa, Wi: > > > https://www.google.com/maps/@44.3143628,-89.8977486,3a,90y,123.77h,92.67t/data=!3m6!1e1!3m4!1sm3nH_h4N5JTscONhqw2xAg!2e0!7i16384!8i8192?entry=ttu > > Can anyone point me at a suitable tutorial or some settings as a > starting point - the only similar tutorials I've found have been > 'planar' buildings parallel to the street, and this is anything but! > > Thanks, > > Simon Ansley > > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/f85bc75d-1b90-4139-930a-102e195bfcd7n%40googlegroups.com.
