* From Sander Wesseling <[EMAIL PROTECTED]>
Just tried it, no bass boost, volume pot wide open: no distortion.
Same with a headphone on the outs. Can you actually see the distortion
if you zoom in on a sample (even if your inputstage doesn't distort)?
Could there be a hardware difference between RM1x's?
(mine is a 1.11/1.00 btw.)
grtz,
Sander.
Chris wrote:
>
> * From Chris <[EMAIL PROTECTED]>
>
> Nope! I`m using an 01v and samson servo amp, neither of which are
> distorting at the input or output stages.
> Bass boost is set flat.
>
> Even if I perform a factory reset, then plug a set of headphones into each
> output in turn, the distortion is still there and its not subtle.
>
> It`s shagged isn`t it!!!!!!
>
> Any one else have this problem?
>
> Chris
>
> >Can any RM1X owners help me!
>
> >I`m experiencing distortion at the main outputs of my RM. Can you do an
> >experiment for me?
>
> >With the RM`s volume pot turned fully up, play back the first factory
> >preset pattern P01 "PSYCHE 1" section A and tell me if you can hear any
> >audio distortion on the outputs.
>
> >Mine is very bad but interestingly, does not appear on the headphone output.
>
> >I know that excessive use of resonance etc can cause this saturation at the
> >outs but my RM seems to be more prone than expected.
___________________________________________________________________________
The Yamaha Hardware Sequencer (qy/rm1x) Mailing List is a free service
provided by TekLab and is open to all members of the Internet community.
For more information about this list and other TekLab Mailing lists visit
our web site: http://www.teklab.com/services/mailinglists/
**> NEW: TekLab Music Technology Forums: http://www.teklab.com/forums/ <**
