What's the deal with Knob Assign? I'm trying to assign CC31 to a knob and
pressing +/- skips over number 31. I *need* number 31 to move a fader in
rebirth. Ideas?
Scott
On Tue, 16 Nov 1999, Scott Kellogg wrote:
> Well, five minutes after my post I figured it out.
>
> Controller [foo] for the Pattern On/Off is a toggle. I kept turning Synth
> 1 off at the beginning of the pattern! An inelegant solution was to put
> another switch at the last tick of the phrase, but then I had to make sure
> the pattern was OFF initially, or I would invert the toggle.
>
> A more elegant solution is to set the volume at the beginning of the
> phrase. A muted phrase is sent a zero.
>
> Regards,
> Scott
>
> On Tue, 16 Nov 1999, Scott Kellogg wrote:
>
> > Hi everyone. I am slaving Rebirth to my Rm1x, which BTW I heartily
> > suggest you to try if you have the means.
> >
> > I'm trying to control the song functions of Rebirth from the Rm1x; namely
> > sending note on messages to switch patterns.
> >
> > I have my Rm1x set to transmit track 16 to channel 16 (tone generator
> > off). I want to turn synth 1 on (the pattern light) and activate Bank A,
> > pattern 1. According to the Rebirth manual, this should be notes C#-1 and
> > F-1, respectively. For some reason , nothing happens.
> >
> > I should note here that the sync works and I have mapped some of the Rm1x
> > knobs to different controllers in Rebirth. Watching the screen knobs move
> > as a moved the physical knobs was a gas.
> >
> > Any suggestions?
> >
> > regards,
> > scott
> >
>
