On Fri, Aug 1, 2008 at 6:16 PM, Jonathan Cameron <[EMAIL PROTECTED]> wrote:
> From: Jonathan Cameron <[EMAIL PROTECTED]>
>
> Add fast_mode option to i2c_pxa_platform_data and use it to set the
> ICR_FM bit appropriately when i2c_pxa_reset is called. Parameter
> called fast_mode rather than frequency as this driver is also used
> for the i2c_pxa_pwr bus which has different normal and fast frequencies.
>
> Signed-off-by: Jonathan Cameron <[EMAIL PROTECTED]>
Acked-by: Eric Miao <[EMAIL PROTECTED]>
>
> --
> This is basically a repost of the original patch with use_pio and
> fast_mode converted to bit fields as suggested / agreed by Eric Miao and
> Ben Dooks.
>
> drivers/i2c/busses/i2c-pxa.c | 6 ++++--
> include/asm-arm/arch-pxa/i2c.h | 3 ++-
> include/asm-arm/arch-pxa/pxa-regs.h | 1 +
> 3 files changed, 7 insertions(+), 3 deletions(-)
>
> --- a/drivers/i2c/busses/i2c-pxa.c 2008-07-31 12:02:42.000000000 +0100
> +++ b/drivers/i2c/busses/i2c-pxa.c 2008-08-01 10:50:38.000000000 +0100
> @@ -65,7 +65,8 @@ struct pxa_i2c {
> unsigned long iosize;
>
> int irq;
> - int use_pio;
> + unsigned int use_pio:1;
> + unsigned int fast_mode:1;
> };
>
> #define _IBMR(i2c) ((i2c)->reg_base + 0)
> @@ -364,7 +365,7 @@ static void i2c_pxa_reset(struct pxa_i2c
> writel(i2c->slave_addr, _ISAR(i2c));
>
> /* set control register values */
> - writel(I2C_ICR_INIT, _ICR(i2c));
> + writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
>
> #ifdef CONFIG_I2C_PXA_SLAVE
> dev_info(&i2c->adap.dev, "Enabling slave mode\n");
> @@ -1013,6 +1014,7 @@ static int i2c_pxa_probe(struct platform
> if (plat) {
> i2c->adap.class = plat->class;
> i2c->use_pio = plat->use_pio;
> + i2c->fast_mode = plat->fast_mode;
> }
>
> if (i2c->use_pio) {
> --- a/include/asm-arm/arch-pxa/i2c.h 2008-07-31 12:00:05.000000000 +0100
> +++ b/include/asm-arm/arch-pxa/i2c.h 2008-08-01 10:51:40.000000000 +0100
> @@ -65,7 +65,8 @@ struct i2c_pxa_platform_data {
> unsigned int slave_addr;
> struct i2c_slave_client *slave;
> unsigned int class;
> - int use_pio;
> + unsigned int use_pio:1;
> + unsigned int fast_mode:1;
> };
>
> extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
> --- a/include/asm-arm/arch-pxa/pxa-regs.h 2008-07-31 12:02:51.000000000
> +0100
> +++ b/include/asm-arm/arch-pxa/pxa-regs.h 2008-07-31 12:34:44.000000000
> +0100
> @@ -448,6 +448,7 @@
> #define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
> #define ICR_SADIE (1 << 13) /* slave address detected int
> enable */
> #define ICR_UR (1 << 14) /* unit reset */
> +#define ICR_FM (1 << 15) /* fast mode */
>
> #define ISR_RWM (1 << 0) /* read/write mode */
> #define ISR_ACKNAK (1 << 1) /* ack/nak status */
>
> _______________________________________________
> i2c mailing list
> [email protected]
> http://lists.lm-sensors.org/mailman/listinfo/i2c
>
--
Cheers
- eric
_______________________________________________
i2c mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/i2c
