Mark Zelden wrote:
On Tue, 21 Jun 2005 13:49:22 -0500, Ward, Mike S <[EMAIL PROTECTED]> wrote:
The usage domains do match the LPARs. That was a recommendation that I
found in the Installation Redbook. One other thing. If I set up the keys
in 1 LPAR can the other LPAR use them or do I have to go through the
process for each LPAR?
Since the LPARs are on the same CEC (box), then you don't have to
do anything. If they were on separate CECs, then you would go through
the same process to load the master keys, but you don't re-init
the CKDS (INIT CKDS ==> N).
Do you mean ICSF initialization ?
IMHO it doesn't matter same CEC or no. You have to initialize ICSF on
every LPAR independently. In fact initialization process consist of
entering master keys and optionally initialization CKDS/PKDS. If you
want to share the keys, then you should share CKDS/PKDS and enter the
same master keys on every LPAR (CEC doesn't matter) using it.
HTH
Regards
--
Radoslaw Skorupka
Lodz, Poland
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
