A virtual beverage of your choice at the most expensive watering hole I can afford.
The IPCS script worked like a charm. PMR opened with IBM. Many thanks to Bob and Rob for their kind assistance. And to all who participate in IBM-MAIN. Hal. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Bob Rutledge Sent: Tuesday, August 23, 2005 4:35 PM To: [email protected] Subject: Re: ESQA Storage leak. Hal, I too use MXI for this, but I start with the CSR command as that shows only orphaned CSA/SQA. Rob not only does great work but he's a good guy to boot! You can, however, use IPCS to look at your running system by specifying ACTIVE in option 0. Then enter ip verbx vsmdata 'owncomm detail all sortby(time)' and scroll down to the bottom of the report. Grab a coffee at this point. Do a "f ' og ' prev" and look for something like Date Time ASID Job Name Id St T Address Length Ret Addr MM/DD/YYYY HH:MM:SS 0098 MMSQUITF S0888511 OG S 02A5F128 00000048 0E0D9C80 08/23/2005 11:19:10 Data ------> E2D4C3D4 E3D6D2D5 00000048 F5000B70 *SMCMTOKN....5...* The "OG" is "owner gone" and the "S" is SQA. The "Ret Addr" is the address after the GETMAIN/STORAGE and that's your culprit. Browse storage before the shown address until you see an eyecatcher and then call the vendor. (In the sample, it's STK's silo software and it's a known issue we're getting ready to address.) Bob ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
