wanting to change in MASDEF OWNMEMB name from what I have and also then MEMBER(1) NAME= >From what I read ...since I share spool with another system.. I shut system I want to change the name on>system(A)... Change the parm's to what I want...
The other system(B) that is still up I need to change MEMBER(1) NAME to NAME=(blank) add another MEMBER(3) NAME=XXXX Reipl-warm start Then on system(B) Change MEMBER(1) NAME=(to name I want) Change MEMBER(3) NAME=XXXX to NAME=(blank) Shut down and warm start again. Then bring up other system(A) with changes I made...warm start.. ---------------------------------------------------------------------- Email Disclaimer This E-mail contains confidential information belonging to the sender, which may be legally privileged information. This information is intended only for the use of the individual or entity addressed above. If you are not the intended recipient, or an employee or agent responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution, or the taking of any action in reliance on the contents of the E-mail or attached files is strictly prohibited. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
