yes .... and I checked it out ---- and I found that whenever we ipl that lpar, it goes into a disabled wait state 0020...........878040.
last time I had *that* problem, (a couple of years ago), I fixed it by putting an "initsqa 0500k 1000k" in the loadXX. I'll try that next sunday. thanks a lot. I'm sorry I didn't think of that on my own .... and not bothered the listers here who were all so kind as to respond THANK YOU TO ONE AND ALL WHO RESPONDED!!!!!!!!!!!!!!!! -----Original Message----- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Gibney, Dave Sent: Tuesday, 03 November, 2009 02:27 PM To: IBM-MAIN@bama.ua.edu Subject: Re: problem w/ data stream to System Operator console at ipl Does the HMC system messages icon start to blink? Does it show a "wait state" ? Dave Gibney Information Technology Services Washington State University > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of Hal Merritt > Sent: Tuesday, November 03, 2009 11:19 AM > To: IBM-MAIN@bama.ua.edu > Subject: Re: problem w/ data stream to System Operator console at ipl > > IIRC, there is a 'load upon activate' option in the activation profile. > Check to see if that is selected or not. > > Our standard procedure is to Activate. > > An attempt to IPL an inactive LPAR ought to generate messages. However, > an activate without the load option will just quietly complete much > like your observed symptoms. > > I'd not completely trust the operator's perception as (s)he has been > hacking around and may not remember exactly what was done in what > sequence. > > > > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of van der Grijn, Bart (B) > Sent: Tuesday, November 03, 2009 1:05 PM > To: IBM-MAIN@bama.ua.edu > Subject: Re: problem w/ data stream to System Operator console at ipl > > Our standard procedure is to use LOAD rather then activate for a normal > IPL, so I might be missing how this works. However, I always thought > the > Activate of an object does whatever it needs to do to get the object in > the desired state, but nothing more. If nothing changes in your > activation profile for this LPAR, is there really anything for the > Activate to do? Did it really try to IPL? > > You have the problem with just the one LPAR. Can it be that you're not > changing the profile for this LPAR while you are for the other LPARs? > > Bart > > > -----Original Message----- > From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On > Behalf Of Bonno, Tuco > Sent: Tuesday, November 03, 2009 1:50 PM > To: IBM-MAIN@bama.ua.edu > Subject: Re: problem w/ data stream to System Operator console at ipl > <...> > when you click on "activate" a small window opens up, saying"to view > activation profile for partition click 'view activation profile' " ; > you > then get into a dialog which eventually allows you to see your L1 and > L2 > parms REGULAR DATA STREAM == the series of messages which appear on the > OPERATOR console, beginning w/ "IEA371I sys1.iplparm on device ..... " > and culminating w/ "IEA101a specify system parameters" > "what do you see .... " ==== nothing on the operator console; after you > enter your final "z eod" the stuff *already* on the operator console > stays there until it blanks itself out (the screen does) when the > series > of messages beginning w/ IEA371I begin to arrive ;; when those messages > DO NOT arrive after 5 minutes, we know it's hung up and then we go do > the "reset/clear" > > no, we do not get the ipl successful message at the HMC; in any case, > the hardware console never changes color ; it's the (proprietary) IBM > HMCz9B Hardware Management Console Workplace v2.10.0; we got one > automatically w/ each of our z9 mainframes. it's a GUI-type thing: a > "graphic user interface" > > <...> > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html > NOTICE: This electronic mail message and any files transmitted with it > are intended > exclusively for the individual or entity to which it is addressed. The > message, > together with any attachment, may contain confidential and/or > privileged information. > Any unauthorized review, use, printing, saving, copying, disclosure or > distribution > is strictly prohibited. If you have received this message in error, > please > immediately advise the sender by reply email and delete all copies. > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO > Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html