Shane, You are, of course, *entirely* correct. But your last sentence is definitely an understatement!
The manual states it will be kneecapped 80% until the "UNDO Temporary Upgrade" is performed! Bob -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Shane Ginnane Sent: Tuesday, June 15, 2010 9:18 AM To: [email protected] Subject: Re: how is the machine capacity resetted to normal state after activation of cbu record Well that's not *entirely* true. You are at liberty to ignore it, and the machine will degrade itself. You will, however, be less than satisfied with the end result. Shane ... On Tue, Jun 15th, 2010 at 11:02 PM, "Richards, Robert B." wrote: > It must be done again (Perform Model Conversion) on HMC. > > Bob > > -----Original Message----- > > Hello listers, > > in two weeks my customer (zVM / zVSE) wants to do a disaster recovery > test at his 2nd location. Therefore we will activate the cbu record > and upgrade the machine from model 2098-a01 to a z02 with 1 IFL. > After the test how is the machine downgraded to a a01. Will it be > done automatically or must it be done again with perform model > conversion? > > Does anybody have experiences with this scenario and can give me any > hints how the capacity is reset after the test? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
