On Fri, 3 Jun 2011 22:28:31 -0500, Russell Witt <[email protected]> wrote:
>That is already being done. As Neal indicated, he has VOL=SER=TAPMAP >specified which is not defined to either rmm or the ATL. > >What you might try is to change the tapemap to actually contain the true >volser (VOL=SER=300007) with STORCLAS=DUPT@SMS (to force the allocation >outside the VTS/ATL if 300007 is an SMS-managed volume) and EXPDT=98000 to >tell rmm that this 300007 is a foreign tape. If that does not work, >hopefully you will get a different EDGxxxx message that will point to a >simple solution. > >Worse case of course is that you will have to follow Greg's advice and >either code the EDGUX100 exit or the "OPENRULE command" (not familiar with >that). > >Russell Witt >CA-1 L2 Support Manager > DING! DING! DING! DING! We HAVE a winner! The STORCLAS was the answer. What ticks me off is that I documented that tidbit in the DR procedures for my previous employer. We had a tape library, but when we did our DR tests at Sungard we used manual drives. As soon as I read that in your post, I knew that would solve my problem. Now I guess I really don't need to implement the EDGUX100 exit. Thanks Russell (and everybody else that threw out suggestions). ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
