Jim, rmm will fail the entry for any moving volume (i.e destination is set) entered to the wrong library. So, assuming VRS retention is completed and volume is moving back to its home location/library - the destination is set by rmm during VRSEL inventory management to the volumes home location. So, enter the volumes back to the correct library, else they are ejected again. If you want the choice over which library is used, you can do so by cancelling the movement using rmm CV subcommand - now the volume is not moving, enter it into either library. Best also use the CV subcommand to set the home location to the library into which you plan to enter the volume.
You can easily use SV subcommand with CLIST operand to build the commands needed..... I have also seen use of an alternate 'home' location - defined using LOCDEF - used for all volumes sent off-site, so they return there, return to scratch, and then are entered into the library that needs scratch volumes. Mike Wood ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
