I think you meant SSAR. This requires another set of setups. To SSAR to other than yourself, you need to be AX authorized.
-----Original Message----- From: Micheal Butz <[email protected]> To: IBM-MAIN <[email protected]> Sent: Wed, Mar 7, 2012 7:52 am Subject: Re: LAE instruction You are right about LAE vs L. As far as being on my dual/pasn list f Saar then load Arx with 1 will go to secondary with out being on my list ent from my iPhone On Mar 6, 2012, at 9:52 PM, Ngafei Huang <[email protected]> wrote: > Chaining these control blocks requires supporting environment and setups as ollow: AR register basing ASNALET needs to be setup. AR register basing ASXBFTCB needs to be setup. Instead of "LAE R4,TCBRBP", it should be "L R4,TCBRBP". Target address space needs to be on your access-list. Target address space must be non-swappable. Raymond Wong -----Original Message----- From: Micheal Butz <[email protected]> To: IBM-MAIN <[email protected]> Sent: Tue, Mar 6, 2012 8:30 pm Subject: Re: LAE instruction Or a more practical use of LAE s chaing thru control blocks from another address space AC. 512 AM R3,R3,ASNALET . R3,ASXBFTCB SING TCB,R3 AE. R4,TCBRBP SING R4,RB ent from my iPhone On Mar 6, 2012, at 5:53 PM, Rob Scott <[email protected]> wrote: > Micheal, Putting a bit of "meat on the bones" to create an example piece of code with omments and notes : (o) We are going to process a linked list of "FOO" elements in a dataspace and > alculate some random hash value based on a subset of bytes in the FOO_NAME ield. (o) This code has been just typed into my e-mail - they may be typos/errors (o) "WA" is the working storage structure/DSECT DO , ALESERV ADD,STOKEN=WA_FOO_STOKEN, Add dataspace containing linked list > f FOOs ALET=WA_FOO_ALET, AL=WORKUNIT, MF=(E,WA_ALESERV_LIST) DOEXIT (LTR,R15,R15,NZ) Failed - quick exit SAC 512 AR-Mode (1) SYSSTATE ASCENV=AR Inform assembler of AR-mode L R6,WA_FOO_HEAD Get head of list LAM AR6,AR6,WA_FOO_ALET Get dataspace ALET (2) USING FOO,R6 DO UNTIL=(ICM,R6,B'1111',FOO_NEXT,Z) Traverse list (3) LAE R7,FOO_NAME Point to FOO_NAME (4) LAE R1,8(,R7) Use R1 for temp pointer (5) XC WA_HASH,WA_HASH Zero hash value DO FROM=(R14,=AL4(L'FOO_NAME-8)) XR R0,R0 IC R0,0(,R1) Get 1-byte (6) AL R0,WA_HASH Add to hash value ST R0,WA_HASH Store new value LAE R1,1(,R1) Next byte of name (6) ENDDO NC WA_HASH,=X'000000FF' 0-255 range for hash ENDDO SAC 0 Inform assembler (7) SYSSTATE ASCENV=P ENDDO (8) ....rest of code (9) Notes : (1) I think it is always worth having a macro to do both the SAC and the YSSTATE for you in one hit (not shown)- stops you forgetting the SYSSTATE and hat can confuse any macros that follow. (2) Loading the ALET in to the AR for the first time - R6 will be able to ddress data in the dataspace (3) AR-mode makes traversing data structures in dataspaces easy as you can ust use normal instructions (if you play by the rules) (4) Because LAE used and FOO dsect covers R6+AR6 - AR7 will contain ALET for ataspace after instruction executed (5) This time we are using R1 to point at 8 bytes into FOO_NAME (for whatever eason) - note that AR1 will get the dataspace ALET (6) Loading and using a byte from the dataspace (7) See (1) (8) Assuming all ARs are zero before we start, if the code goes thru uccessfully, then AR1, AR6 and AR7 will contain the ALET of the dataspace here > you may wish to consider zeroing the ARs at this point if they are no longer eeded. (9) Prudent use of "LAM AR14,AR1,=4A(0)" will protect you from unintentional > R values in "working" regs after calling certain system services - you can ever be sure how in-house macros expand. Hope this helps Rob Scott Lead Developer Rocket Software 275 Grove Street * Newton, MA 02466-2272 * USA Tel: +1.781.684.2305 Email: [email protected] Web: www.rocketsoftware.com -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of > icheal Butz Sent: 06 March 2012 21:53 To: [email protected] Subject: Re: LAE instruction So SAC 512 LAE R3,0(,R4) R3 is CPYA from access R4 right -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of > cKown, John Sent: Tuesday, March 06, 2012 4:22 PM To: [email protected] Subject: Re: LAE instruction Yes, from the LAE instruction text: <quote> The address specified by the X2, B2, and D2 fields is placed in general egister R1. Access register R1 is loaded with a value that depends on the urrent value of the address-space-control bits, bits 16 and 17 of the PSW. If the address-space-control bits are 01 binary, the value placed in the access register also depends on whether the > 2 field is zero or non- zero. ... PSW Bits 16 and 17 Value Placed in Access Register R1 00 00000000 hex (zeros in bit positions 0-31) 10 00000001 hex (zeros in bit positions 0-30 and one in bit position 31) 01 If B2 field is zero: 00000000 hex (zeros in bit positions 0-31) If B2 field > s nonzero: Contents of access register B2 11 00000002 hex (zeros in bit positions 0-29 and 31, and one in bit position 0) From the SAC instruction Code Name of Mode Result in PSW Bits 16 & 17 0000 Primary space 00 0001 Secondary space 10 0010 Access register 01 0011 Home space 11 All others Invalid </quote> SAC 512 has is '0010' from the above and results in b'01' or AR mode in the SW bits 16 & 17. Which is what is required for the LAE instruction to set the ccess register of the result access register from the base access register when not b'0000'). John McKown Systems Engineer IV IT Administrative Services Group HealthMarkets(r) 9151 Boulevard 26 * N. Richland Hills * TX 76010 (817) 255-3225 phone * [email protected] * www.HealthMarkets.com Confidentiality Notice: This e-mail message may contain confidential or roprietary information. If you are not the intended recipient, please contact he sender by reply e-mail and destroy all copies of the original message. ealthMarkets(r) is the brand name for products underwritten and issued by the nsurance subsidiaries of HealthMarkets, Inc. -The Chesapeake Life Insurance ompany(r), Mid-West National Life Insurance Company of TennesseeSM and The EGA ife and Health Insurance Company.SM > -----Original Message----- > From: IBM Mainframe Discussion List > [mailto:[email protected]] On Behalf Of Micheal Butz > Sent: Tuesday, March 06, 2012 3:00 PM > To: [email protected] > Subject: Re: LAE instruction > > John Mckiwns reply was a explanation of the SAC inst. > Which I am aware of > > The Doc for LAE says the inst the functionality is dependent on PSW > bits > > 16 17 address space control bits these are set by the SAC inst > > > So my original question remains does > > Should address space control buts be set via the sac before executing > the LAE > > > Sent from my iPhone > > On Mar 6, 2012, at 3:37 PM, Rob Scott <[email protected]> > wrote: > >> John McKown's reply covered these points very well >> >> Rob Scott >> Lead Developer >> Rocket Software >> 275 Grove Street * Newton, MA 02466-2272 * USA >> Tel: +1.781.684.2305 >> Email: [email protected] >> Web: www.rocketsoftware.com >> >> >> -----Original Message----- >> From: IBM Mainframe Discussion List > [mailto:[email protected]] On Behalf Of Micheal Butz >> Sent: 06 March 2012 19:59 >> To: [email protected] >> Subject: Re: LAE instruction >> >> Thanks >> >> Regarding my questions >> >> The doc says the inst is dependent >> On address space control bits which is set by the SAC inst. >> >> Secondly seems like the displacement doesn't play a role in the inst >> >> Sent from my iPhone >> >> On Mar 6, 2012, at 2:49 PM, Rob Scott > <[email protected]> wrote: >> >>>> You have coded "LAE R3,0(R4)" - which is the same as > "LAE R3,(R4,R0)" >>> >>> Should read : >>> >>> You have coded "LAE R3,0(R4)" - which is the same as > "LAE R3,0(R4,R0)" >>> >>> Rob Scott >>> Lead Developer >>> Rocket Software >>> 275 Grove Street * Newton, MA 02466-2272 * USA >>> Tel: +1.781.684.2305 >>> Email: [email protected] >>> Web: www.rocketsoftware.com >>> >>> >>> -----Original Message----- >>> From: IBM Mainframe Discussion List > [mailto:[email protected]] On >>> Behalf Of Rob Scott >>> Sent: 06 March 2012 19:47 >>> To: [email protected] >>> Subject: Re: LAE instruction >>> >>> Commas are *very* important in AR-mode >>> >>> You have coded "LAE R3,0(R4)" - which is the same as > "LAE R3,(R4,R0)" >>> >>> Coded that way there is no automatic way that AR3 is going > to inherit the AR4 value. >>> >>> You need : "LAE R3,0(,R4)" >>> >>> This will ensure that AR3 is populated from the AR for the > referenced base register R4. >>> >>> >>> Rob Scott >>> Lead Developer >>> Rocket Software >>> 275 Grove Street * Newton, MA 02466-2272 * USA >>> Tel: +1.781.684.2305 >>> Email: [email protected] >>> Web: www.rocketsoftware.com >>> >>> >>> -----Original Message----- >>> From: IBM Mainframe Discussion List > [mailto:[email protected]] On >>> Behalf Of Micheal Butz >>> Sent: 06 March 2012 19:05 >>> To: [email protected] >>> Subject: LAE instruction >>> >>> Hi, >>> >>> >>> >>> I have two part question regarding the LAE instruction >>> >>> >>> >>> . What would the sac value e.g. 256,512,768 have > to be that when >>> using the LAE instructions with the following operands LAE > 3,0(R4) >>> would >>> AR3 get loaded with AR4 >>> >>> >>> >>> . Second what value does the displacement play in > the instruction >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> Thanks >>> >>> >>> > ---------------------------------------------------------------------- >>> For IBM-MAIN subscribe / signoff / archive access > instructions, send >>> email to [email protected] with the message: INFO IBM-MAIN >>> >>> > ---------------------------------------------------------------------- >>> For IBM-MAIN subscribe / signoff / archive access > instructions, send >>> email to [email protected] with the message: INFO IBM-MAIN >>> >>> > ---------------------------------------------------------------------- >>> For IBM-MAIN subscribe / signoff / archive access > instructions, send >>> email to [email protected] with the message: INFO IBM-MAIN >> >> > ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access > instructions, send email to [email protected] with the > message: INFO IBM-MAIN >> >> > ---------------------------------------------------------------------- >> For IBM-MAIN subscribe / signoff / archive access instructions, send >> email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to [email protected] with the message: INFO IBM-MAIN > > ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- or IBM-MAIN subscribe / signoff / archive access instructions, end email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- or IBM-MAIN subscribe / signoff / archive access instructions, end email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
