Thanks
Sent from my Verizon Wireless Droid
-----Original message-----
From: Joe Connally <joe.conna...@motion-ind.com>
To: IBM-MAIN@bama.ua.edu
Sent: Tue, Jun 12, 2012 21:29:12 GMT+00:00
Subject: Re: installing serverpac for 1.13 using 1.11 system
I did the same thing recently on a CustomPac. Step1 of the RESTORE job is a
REXX exec and mounts the file system and then loads. Look at the exec and
you should see the mount logic. I think the exec is CPPEHFS.
Joe Connally
-----Original Message-----
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf
Of Tim Brown
Sent: Tuesday, June 12, 2012 4:08 PM
To: IBM-MAIN@bama.ua.edu
Subject: installing serverpac for 1.13 using 1.11 system
During the serverpac for zos 1.13 I believe there is a step where you mount
the new systems root system
on the driving system at the /service point.
Is the command for this
MOUNT FILESYSTEM('ZOS13.OMVS.VAR.ROOT') +
MOUNTPOINT('/service') +
TYPE(ZFS) MODE(RDWR)
I believe we had done this originally and an IPL of the driving system was
performed since then.. We cant find this step documented and the subsequent
ALTCAT job fails with.
File system ZOS13.OMVS.ROOT not mounted
BPXISETS not called to convert etc and var to symlinks
Please ensure that ZOS13.OMVS.ROOT is mounted
and submit the job again.
Please confirm
Thanks,
Tim Brown
Supervisor Computer Operations
Central Hudson Gas & Electric
284 South Ave
Poughkeepsie, NY 12601
Email: <mailto:tbr...@cenhud.com> tbr...@cenhud.com <<
<mailto:tbr...@cenhud.com> mailto:tbr...@cenhud.com>>
Phone: 845-486-5643
Fax: 845-486-5921
Cell: 845-235-4255
"This message contains confidential information and is only for the intended
recipient. If the reader of this message is not the intended recipient, or
an employee or agent responsible for delivering this message to the intended
recipient, please notify the sender immediately by replying to this note and
deleting all copies and attachments."
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email
to lists...@bama.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN
