On Fri, 14 Apr 2006 14:58:18 -0500, Jimmy Wagner <[EMAIL PROTECTED]> wrote:
>We have a 6 LPAR DASD only sysplex. We need to add a new LPAR to the >configuration. Using existing CHP's, control units and devices were added >for the new LPAR. A working unit was used as a model. The new devices >connect to 5 of the 6 LPARs, 1 LPAR comes up as Path not operational. Does >anyone have some insight as to what I need to look at? Thanks in advance. This sounds like you hit the limit of logical paths the the Dasd control unit supports. I would check with your disk vendor to see what that limit is. You can verify that this is the problem by varying off 1 of the paths from a working system and then varying on the path from the failing system. If this works than for sure that is the problem. Doug ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
