In a message dated 7/1/2006 12:03:09 P.M. Central Standard Time,
[EMAIL PROTECTED] writes:
R00,SYSP=HR,CLPA
>>
Boy the manual is less then consistent.
1.1.5.2 Specifying System Parameters Not Defined in LOADxx
The LOAD parameter can supply values not defined at system installation
time. If this is not done, you must supply them as system parameters in
response
to the following system message:
IEA101A SPECIFY SYSTEM PARAMETERS FOR product-name
You must respond to this message. You can respond with specific system
parameters, such as
REPLY 00,CLPA
,SYSP=83,LNK=(04,05,PQ),SYSNAME=AQ
However, a typographical error made in this response can lead to undesirable
system operation. To help avoid this situation, the system programmer can
specify system parameters in IEASYSxx parmlib members. If this has been done,
you can respond to message IEA101A in one of the following ways:
* To use the system parameters specified in the IEASYS00 parmlib
member, press the ENTER key.
* To use system parameters specified by IEASYSxx parmlib members along
with IEASYS00, use the SYSP operand on the REPLY command to specify the
2-character suffixes that identify the IEASYSxx parmlib members.
For example, to use the parameters specified in parmlib members IEASYSAA and
IEASYSBB along with IEASYS00, enter:
REPLY 00,SYSP=(AA,BB)
Note: Depending on the specific system parameter, a parameter value
specified in the alternate parmlib members supplements or overrides the value
specified in IEASYS00.
If the reply is longer than one line (there are 80 characters per line), you
can follow the last parameter with a comma or a blank and CONT. For details
on how to continue system parameters, see _"Specifying System_
(http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2g141/4.28.11?DT=2004032514123
8#HDRR200U) _Parameters" in topic 4.28.11_
(http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/BOOKS/iea2g141/4.28.11?DT=20040325141238#HDRR200U)
in
the description of the REPLY command in this book.
For details about parmlib members, see _z/OS MVS Initialization and Tuning_
(http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/DOCNUM/SA22-7592/CCONTEN
TS?) _Reference_
(http://publibz.boulder.ibm.com/cgi-bin/bookmgr_OS390/DOCNUM/SA22-7592/CCONTENTS?)
.
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
