-fyi- From EMC: Symetrix 8000 and DMX support it.
These minimum Enginuity microcode levels have enhanced z9 error recovery and introduce MIDAW support: 1. Symm 5: Enginuity 5568.68.28 with the 5568 z9 e-pack installed 2. Symm 6: Enginuity 5670 must upgrade to the supported 5671 level 3. Symm 6: Enginuity 5671.53.59 or higher 4. Symm 7: Enginuity 5771.81.90 or higher Symmetrix 5000 (Symm 4.x) or prior storage arrays attached to an IBM 2094 CPU (z9) are not supported. Also no code changes will be made to any Enginuity 5x67 or prior for 2094 CPU (z9) support. Ragards, Freddy On Mon, 17 Jul 2006 11:49:00 -0500, Mark Zelden <[EMAIL PROTECTED]> wrote: >On Fri, 14 Jul 2006 17:44:43 -0400, Bruce Black <[EMAIL PROTECTED]> >wrote: > >>EMC does with recent microcode changes (not sure if it is limited to the >>DMX boxes). > >According to one of our EMC reps, MIDAW support requires the DMX3 Symmetrix. > >Regards, > >Mark >-- >Mark Zelden >Sr. Software and Systems Architect - z/OS Team Lead >Zurich North America / Farmers Insurance Group >mailto: [EMAIL PROTECTED] >z/OS and OS390 expert at http://searchDataCenter.com/ateExperts/ >Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html > >---------------------------------------------------------------------- >For IBM-MAIN subscribe / signoff / archive access instructions, >send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO >Search the archives at http://bama.ua.edu/archives/ibm-main.html >========================================================================= ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
