THe Amdahl OSA is not capable of QDIO, it is in fact defined as an LCS device. This means both the real IP Address and the VIPA need to be difned to the OSA to get it to route correctly. On an IBM OSA this is done by updating the OSA configuration (OAT) with both addresses. For the Amdahl card this does not appear to be possible. One possibility is to define 2 devices to each LPAR with different IP Addresses on each. I do not beleive this will work though, as the device for the VIPA seems to require a type of VIRTUAL. OSA/SF will not work on Amdahl OSAs, so no help there, unfortunately. I do have a manual provided by Amdahl for OSAs, but it does not mention how this should be done at all. I would be happy with either a response that 'do this and this and this', or 'it can't be done'
---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
