Ok, sorry it has taken me a little while to respond.
Here is the output from the NETSTAT GATE command:
EZZ2350I MVS TCP/IP NETSTAT CS V1R7 TCPIP Name: TCPIP 14:32:15
EZZ2635I Known gateways:
EZZ2636I NetAddress FirstHop Link Pkt Sz Subnet Mask Subnet
Value
EZZ2637I ---------- -------- ---- ------ ----------- ------
------
EZZ2638I Defaultnet 10.2.8.2 Z990CH41 1492 <none>
EZZ2638I 10.0.0.0 <direct> Z990CH41 1492 0.255.248.0
0.2.8.0
EZZ2638I 10.2.12.103 <direct> Z990CH41 1492 HOST
EZZ2638I 127.0.0.1 <direct> LOOPBACK 65535 HOST
EZZ2638I 192.0.0.0 <direct> IQDIO1 8192 0.255.255.0
EZZ2638I 192.0.1.68 <direct> IQDIO1 8192 HOST
And here is the output from the NETSTAT ROUTE command:
EZZ2350I MVS TCP/IP NETSTAT CS V1R7 TCPIP Name: TCPIP 14:34:07
EZZ2755I Destination Gateway Flags Refcnt Interface
EZZ2756I ----------- ------- ----- ------ ---------
EZZ2757I Default 10.2.8.2 UGS 000000 Z990CH41LNK1
EZZ2757I 10.2.8.0/21 0.0.0.0 US 000000 Z990CH41LNK1
EZZ2757I 10.2.12.103/32 0.0.0.0 UH 000000 Z990CH41LNK1
EZZ2757I 127.0.0.1/32 0.0.0.0 UH 000002 LOOPBACK
EZZ2757I 192.0.1.0/24 0.0.0.0 US 000000 IQDIO1
EZZ2757I 192.0.1.68/32 0.0.0.0 UH 000000 IQDIO1
On Fri, 20 Oct 2006 01:01:41 +0200, Chris Mason <[EMAIL PROTECTED]> wrote:
>Richard
>
>An excellent idea.
>
>Matthew
>
>Let me build on what Richard is suggesting, in effect, the purely pragmatic
>approach to creating a BEGINROUTES/ENDROUTES block from your existing
>GATEWAY statement. Proceed as follows:
>
>1. Set your system up with the working GATEWAY statement.
>2. Issue NETSTAT GATE and note how the GATEWAY statement maps into the
>output of this command. Note that <direct> under "FirstHop" is the
>equivalent of the equal sign, "=", and <none> under "Subnet Mask" is the
>equivalent of "0"
>3. Issue NETSTAT ROUTE and note what appears.
>4. Create the BEGINROUTES/ENDROUTES block from what you see in the NETSTAT
>ROUTE output.You can ignore the "Flags" and "Refcnt" columns and you need to
>interpret "0.0.0.0" under "Gateway" as an equal sign, "=". Also you'll need
>to add the "MTU" keyword and value which, in fact, you can discover by using
>the NETSTAT ROUTE DETAIL command.
>
>Perhaps you can let me know how I managed to give you the wrong information
>concerning how to perform the transformation.
>
>If this isn't clear, please post the NETSTAT GATE and NETSTAT ROUTE output.
>
>Chris Mason
>
>----- Original Message -----
>From: "Richard Peurifoy" <[EMAIL PROTECTED]>
>Newsgroups: bit.listserv.ibm-main
>To: <[email protected]>
>Sent: Thursday, 19 October, 2006 10:34 PM
>Subject: Re: I love TCPIP (not!)
>
>
>> Chris Mason wrote:
>>
>> > Matthew
>> >
>> > It worries me that you are testing with FTP which really isn't the place
>to
>> > start when you have problems. Much better is to use PING and, possibly,
>take
>> > a peek at the ARP tables.
>> >
>>
>> Another thing to do is use NETSTAT to look at what is actually being used
>by
>> TCP/IP.
>>
>> NETSTAT GATE will show the routes formated similar to the GATEWAY
>statments,
>> while
>> NETSTAT ROUTE will show them formated similar to the BEGINROUTES style.
>>
>> This will work weather you use either form of definition, or even for
>routes
>> from OMPROUTE
>> or redirects if you allow them.
>>
>> Richard
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
