Tried to hit the archives to look for similar conditions, but it seems to be running a bit sluggishly this morning.
Situation: Operator somehow hit the enable interface switch on a bank of 3590 drives. They went boxed and no matter what we have done, we cannot get them back. We have powered off/on the bank of drives, toggled chips, varied with various forms of vary for chipds and devices, all to no avail. Online doc says call hardware support. Could something have tripped inside the unit to require an engineer to reset? Thank you in advance... Daniel McLaughlin Z-Series Systems Programmer Crawford & Company 4680 N. Royal Atlanta Tucker GA 30084 phone: 770-621-3256 fax: 770-621-3237 email: [EMAIL PROTECTED] web: www.crawfordandcompany.com This transmission is intended exclusively for the individual or entity to which it is addressed. This communication may contain information that is confidential, proprietary, privileged or otherwise exempt from disclosure. If you are not the named addressee, you are NOT authorized to read, print, retain, copy or disseminate this communication, its attachments or any part of them. If you have received this communication in error, please notify the sender immediately and delete this communication from all computers. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
