Dave, If you could send me directly the entire joblog from one of the failing jobs; I will see if there was a r11.0 fix or even a r11.5 fix that can be applied to your system. You indicate you are still at R5.2, but what genlevel of R5.2?
Russell Witt [EMAIL PROTECTED] CA-1 Level-2 Support Manager -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] Behalf Of O'Brien, David W. (NIH/CIT) [C] Sent: Tuesday, June 12, 2007 8:54 AM To: [email protected] Subject: Re: CA-1 install - user exits? Russell, Thank you for your response. I think I understand now and can proceed. I was pointed to CA-1 as the problem by the following from Innovation: There probably was a previous message that looked like this: IEC999I IFG055CA,job,step,error-text (This message was in fact present in the joblog.) I believe that IFG055CA is CA's version of the EOV exit most likely with CA-1. I would recommend calling CA with the above info as well and look at CA-APARs QO72318 and QO73756. end of Innovation response. Because we are running r5.2 which I believe is not supported, I did not open an issue with CA but chose to install the current release. Regards, Dave O'Brien ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
