Thanks for the comprehensive information. > -----Ursprungligt meddelande----- > Från: IBM Mainframe Discussion List > [mailto:[EMAIL PROTECTED] För Timothy Sipples > Skickat: den 5 juli 2007 04:36 > Till: [email protected] > Ämne: Re: SV: PCOM questions
... > Both products are compatible with > 32-bit and 64-bit > clients, as applicable. Really ? Is there any "reference" installation that has PCOMM installed at 64-bit windows and also use it ? (Wondering because I have heard a lot about problems to getting software to work on 64-bit windows.) > Personal Communications V5.9, on Windows 2000 and Windows XP clients, > specifies that the client should have a minimum of 64 MB with 128 MB > recommended. It's not a particularly "heavy" piece of > software and should > be fine on the 512 MB PC mentioned. Sounds fine. But my current needs/wonderings is: 1. What practical enhancements of version 5.9 is significantly benefitting me ? (Compared to ver 4.1) 2. Are there any solution to my original question ? Which was: You can swap between different PCOM-windows (each with a session against a host) with a "hot key" - if You have defined the key as "Jump next" etc. But this doesn't work if a PCOM-macro is currently executing in the window I have in focus. (I have to wait until the macro has finished.) Could I change this in any way ? (I can of course change window with alt+tab but then I have to go through all other PC-applications I have active at that moment.) TIA _____________________________________________________________ Thomas Berg Specialist IT Utveckling Swedbank AB (Publ) ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
