Chris, If you're actually getting these, it's an improvement over what used to happen when you IPL'd systems too closely together chronologically. They used to either wait state, or go out to "la la land" and never report back, load an OS, or wait state (green on HMC, "operating", but no OS ever shows up). Images/LPARs that are IPLd too close together appear to be fighting over access to the CFs to check in to the PLEX, and from what I've seen the CFs only seem to be able to check in one system at a time in a very serial manner.
Wait until the LPAR joining the plex is responding to a routed D A,L command and has at least one task started before performing the load/activate on the next LPAR. (alternately, wait 2-3 minutes between activations, that seems to work as well) Hope this helps, Gary Diehl MVS Support "The glass is neither half full or half empty; the engineer who designed the glass simply allowed for a 100% increase in fluid storage." -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Chris Burgess Sent: Tuesday, October 30, 2007 6:51 AM To: [email protected] Subject: CNZ9003I Message We see these messages on some of our LPARs during IPL: CNZ9003I IPL DELAYED DUE TO A CONSOLE MESSAGES MIGRATION IN PROGRESS OR ANOTHER SYSTEM IPLING. TIME DELAYED SO FAR: Is there any way to get around this? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
