We converted here at CDC about 2 years ago because we were down to around 50 users on Roscoe, and we could not justify the cost. I was able to write a job to pull all of the Roscoe libraries over to PDS's, and I assisted the users in rewriting their RPF's to REXX execs. Unfortunately, it was a VERY manual process to move the RPF's, so it will take some work to make this conversion... I don't know of any tool that will automate the process of converting the RPF's to REXX or CLIST. But I can send a sample of how I pulled off the Roscoe libraries into PDS's....
Email me offline if you are interested. C. Todd Burrell Senior z/OS Systems Programmer ITSO (404) 498-3299 (404) 723-2017 (cell) -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Robert Fake Sent: Friday, December 07, 2007 9:32 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Conversion aid for ROSCOE RPF's to TSO CLISTS or TSO REXX EXECS I had a similar experience to Steve...we could run 100 Roscoe users on just a fraction of the CPU of TSO. I would perform some performance/capacity planning studies before making the switch. Bob Robert B. Fake InfoSec, Inc. 703-825-1202 (o) 571-241-5492 (c) 949-203-0406 (efax) [EMAIL PROTECTED] Visit us at www.infosecinc.com The information contained in this e-mail message may be proprietary and/or confidential. It is for intended addressee(s) only. If you are not the intended recipient, you are hereby notified that any disclosure, reproduction, distribution or other use of this communication is strictly prohibited and could, in certain circumstances, be a criminal offense. If you have received this e-mail in error, please notify the sender by reply and delete this message without copying or disclosing it. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Thompson, Steve Sent: Friday, December 07, 2007 9:22 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: Conversion aid for ROSCOE RPF's to TSO CLISTS or TSO REXX EXECS -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Hessong, Keith Sent: Friday, December 07, 2007 6:54 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Conversion aid for ROSCOE RPF's to TSO CLISTS or TSO REXX EXECS <SNIP> I am looking for a 3rd party software product that may help us accomplish this or someone who has already done this that might be willing to share the code that they used to do this. I would also be interested in hearing about user experiences of people who have already undertaken this task. <SNIP> Start budgeting for a CPU upgrade. If ROSCOE has similar efficiency as ACS/WYLBUR had, you will see a significant increase in CPU utilization. In the 3090 days, the moving of approximately 30 people to TSO resulted in a company (insurance industry) looking at a CPU upgrade. They stopped the migration -- probably because the cost of the extra CPU and the corresponding increase in software costs. Regards, Steve Thompson -- All opinions expressed by me are my own and may not necessarily reflect those of my employer. -- ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html