> -----Original Message-----
> From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
> Behalf Of Patrick O'Keefe
> Sent: Friday, February 15, 2008 3:46 PM
> To: [email protected]
> Subject: Re: JES2 NJE question: SNA(CTC) vs. TCPIP
> 
> On Fri, 15 Feb 2008 10:22:35 -0500, Shmuel Metz (Seymour J.)
> <[EMAIL PROTECTED]> wrote:
> 
> >...
> >>Either way, I think he did mean Class C.
> >
> >No, Class C is a /24, not a /16.
> >...
> 
> Well, it's not so straightforward.
> 
> In RFC 791, but rewritten better in RFC 1365:
>    Class A has the highest order bit set to 0, a 7 bit network number
>    and a 24 bit host address.
> 
>    Class B has the two higher order bits set to 10, a 14 bit network
>    number and a 16 bit host address.
> 
>    Class C has the three higher order bit set to 110, a 21 bit network
>    number and a 8 bit host address.
> 
> 192.168/16
> 192 makes it class C; /16 makes it class B.
> 
> You pick class B.  I pick class C.
> 
> In either case it is a private IP address, and IP address classes no

  That was the whole point, John doesn't need his Network folks
permission or to even tell them if he uses a private IP address for
Hipersockets inside one CEC !!!


> longer matter in the real world (except for IP address masks in
> IBM's support of OSPF in OMPROUTE.  grrrr.)
> 
> Pat O'Keefe
> 

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to