mark,,
The Not defined can mean:
Not defined means that the storage group or volume (specified on this
command) is specified in the SMS configuration as not being connected
to this MVS system. If the storage group or volume is not defined in
the active configuration, a message indicates that the system rejects
this command for that reason. If the command is issued for a storage
group with no volume, another message indicates the lack of volumes in
that group. The symbol for this state is &ia.&odqf..'
VTOC is probably a CBT utility. It is not an MVS function as far as I know.
Have you checked with ISMF on your volume? I find that is fairly reliable for
verifying volumes under SMS control.
Lizette
>
>VTOC V(SMS013) SP
> IKJ56500I COMMAND VTOC NOT FOUND
> ***
>
>On Thu, Feb 21, 2008 at 1:01 PM, willie bunter <[EMAIL PROTECTED]>
>wrote:
>
>> Mark,
>>
>> Allow me to add my 2 bits. Try the following:
>>
>> A)TSO OPTION 6
>> B) Enter command :VTOC V(XXXXXX) SP xxxxxx=volser
>> C) In the "STATUS" it will post "SMS" if the pack is under SMS.
>>
>> P.S. You can enter VTOC V(X) SP which will give you all dasd starting
>> with "X".
>>
>> Good luck.
>>
>> So many great options. Thanks very much.
>>
>> I did find a problem with using D SMS,VOL=(volser) It reports a volume as
>> not defined
>> CBR1064I Command rejected. Volume serial number
>> SMS013 undefined.
>> But IEHLIST shows that it SMS managed.
>>
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
