Don't know...I never defined one without a director. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Brian Peterson Sent: Monday, March 03, 2008 4:20 PM To: [email protected] Subject: Re: FICON CTC
On Mon, 3 Mar 2008 16:14:44 -0500, Bielskie, Stephen wrote: >Also, after you define them, you can put a 'K' next to the FCTC control >unit in HCD and it will show you what other FCTC Cus it is connected to. >If there are blanks on either column of this display, there is a >definition error. > >Steve I thought the HCD reports and the K command would only work if the CTC included a Director. The original poster was trying to define a CTC with point- to-point connections - with no Director. Brian ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ============================================================================== Please access the attached hyperlink for an important electronic communications disclaimer: http://www.credit-suisse.com/legal/en/disclaimer_email_ib.html ============================================================================== ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
