On Tue, 8 Apr 2008 07:06:30 -0500 Tom Harper <[EMAIL PROTECTED]> wrote:
:>They should be formatted out towards the top of the SUMMARY FORMAT REGS :>display. After you do the display, FIND the following: :>SSD:. The SSD contains the addresses of all of the SSRBs at offset :>X'0018' (again, from the IPCS SUMMARY FORMAT), and the SSRBs contain the :>SRB plus all of the registers, linkage stack, etc, which is all :>documented normally. Why should there be an SSRB? The code running in SRB mode is active at the time the SLIP(IF) hit. Does SLIP create an SSRB for the unit of work? :>-----Original Message----- :>From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On :>Behalf Of Binyamin Dissen :>Sent: Tuesday, April 08, 2008 5:14 AM :>To: [email protected] :>Subject: Re: How to format the current linkage stack for a SLIP dump :>taken in SRB mode? :>On Mon, 7 Apr 2008 21:08:58 -0400 "Craddock, Chris" :><[EMAIL PROTECTED]> :>wrote: :>:>Jim Mulder said :>:>Binyamin said :>:>> > Is there something easier than looking at the home address space :>:>storage :>:>> off :>:>> > of CR15? :>:>> CBF cr15value ASID(x'homeasid') STR(LS) :>:>...or go to option 6 and issue "summ format regs". IPCS will format :>all :>:>of the linkage stack entries that exist for all of the units of work :>in :>:>the address space. That's usually easier than rooting around looking :>at :>:>CR15 values that might be stashed in one place or another because the :>:>summary formatter is clued in on whether the entries are valid or not. :>I tried the simpler way, but could not find it. :>Situation: SRB mode, PASN=/HASN, multiple tasks in each memory, SLIP. :>Where should I look for the linkage stack for this current unit of work :>which :>is in SRB mode? :>I do have CR15 from the slip. -- Binyamin Dissen <[EMAIL PROTECTED]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
