On Tue, 8 Apr 2008 08:32:49 -0500 Tom Harper <[EMAIL PROTECTED]> wrote:
:>In every dump I've seen, all SRBs are present in the form of SSRBs. Why :>this is the case I'm not one hundred per cent certain. But it works for :>me. Perhaps it is because when the SLIP occurs, the SRB is suspended. Well, I know that there is a linkage stack (with entries) associated with the trapped process, formatting off of CR15 shows the data, but I see nothing in the summary format / summary regs that shows the formatted linkage stack. Have you seen this when looking at the dump of an IF SLIP while the SRB mode code was active? :>-----Original Message----- :>From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On :>Behalf Of Binyamin Dissen :>Sent: Tuesday, April 08, 2008 8:27 AM :>To: [email protected] :>Subject: Re: How to format the current linkage stack for a SLIP dump :>taken in SRB mode? :> :>On Tue, 8 Apr 2008 07:06:30 -0500 Tom Harper <[EMAIL PROTECTED]> :>wrote: :> :>:>They should be formatted out towards the top of the SUMMARY FORMAT :>REGS :>:>display. After you do the display, FIND the following: :> :>:>SSD:. The SSD contains the addresses of all of the SSRBs at offset :>:>X'0018' (again, from the IPCS SUMMARY FORMAT), and the SSRBs contain :>the :>:>SRB plus all of the registers, linkage stack, etc, which is all :>:>documented normally. :> :>Why should there be an SSRB? The code running in SRB mode is active at :>the :>time the SLIP(IF) hit. :> :>Does SLIP create an SSRB for the unit of work? -- Binyamin Dissen <[EMAIL PROTECTED]> http://www.dissensoftware.com Director, Dissen Software, Bar & Grill - Israel Should you use the mailblocks package and expect a response from me, you should preauthorize the dissensoftware.com domain. I very rarely bother responding to challenge/response systems, especially those from irresponsible companies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
