On Wed, 16 Jul 2008 14:33:44 -0500, Stephen Wolf <[EMAIL PROTECTED]> wrote:
>Hello List, > >Are system is a 2096 U03 with three LPARs but no sysplex. Two LPARs are >production, one at z/OS 1.4 and a small one at z/OS 1.7. The current IODF is >a version 5 level. > >This weekend I activated a new IODF on the 1.4 system using the HCD dialogs >which completed successfully. I did not do an activate on the 1.7 We then >IPLed the 1.4 system and it just waited. The NIP console was not activated >and there was not a hard wait. I brought up my rescue system and changed >the IODF back to the old one and the 1.4 system IPLed ok. > > The 1.7 system complained about the new UCBs when I did the activate but >it kept running. > >We have done a IODF change before but at that time only the 1.4 LPAR was >active. > >DO I need to do a software IODF change on the 1.7 LPAR before I do the IODF >on the 1.4 system. > Do you have the compatibility PTF on z/OS 1.4 that will allow you to use the version 5 level IODF? The required maintenance is documented in the z/OS 1.7 Planning for Migration manual. Mark -- Mark Zelden Sr. Software and Systems Architect - z/OS Team Lead Zurich North America / Farmers Insurance Group - ZFUS G-ITO mailto:[EMAIL PROTECTED] z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/ Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
