John, A long time ago, I put some comments in my VATLST member that help me to remember what things are. I cut & pasted from my parmlib member from P&H and put it in the parmlib here for reference. You can do the same if you like. Here it is:
VATDEF IPLUSE(PRIVATE),SYSUSE(PRIVATE) Z17CAT,1,2,3390 ,Y Z17DB2,1,2,3390 ,Y Z17DB3,1,2,3390 ,Y CC8 MOUNT STATUS Z17DLB,1,2,3390 ,Y 0 - PERMANENT RES Z17HFS,1,2,3390 ,Y 1 - RESERVED Z17RES,1,2,3390 ,Y Z17RS2,1,2,3390 ,Y CC10 MOUNT ATTRIBUTES Z17RS3,1,2,3390 ,Y 0 = STORAGE Z17SMP,1,2,3390 ,Y 1 = PUBLIC Z17SPL,1,2,3390 ,Y 2 = PRIVATE Eric ---- John Dawes <[EMAIL PROTECTED]> wrote: > Hallo To All, > > My question is about the VATLIST. I am not sure if I am using the proper > terminology. This member is found in SYS1.PARMLIB and is scanned by the > system to verify the disk status after an IPL is performed. What I would > like to know what the fields represent. I have fair idea but I would like a > confirmation. I GOOGLED for VATLIST but the search gave me results that I am > not looking for. Here is an example to better explain my question > VATDEF IPLUSE(PRIVATE) SYSUSE(PRIVATE) > AGIA* ,0,2,3390 ,N > CTUI* ,0,2,3390 ,N > DBI0* ,0,2,3390 ,N > TMCI* ,0,2,3390 ,Y > WORK1*,0,0,* ,N > > The first field is the VOLSER, I think that the "2" represents that the > volume is mounted as PRIVATE. The "0" (in the second field) means that the > volume is mounted as STORAGE. I am not sure what the "0" in the first field > indicates and what the "N" or "Y" in the last field signifies. > > I welcome all your input. Also, for the future could someone tell me where I > can find this information.. > > Thanks in advance for your help. > -- Eric Bielefeld Systems Programmer Washington University St Louis, Missouri 314-935-3418 ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
