I'm trying to run an OSA trace after I issue the Vary command and display the
TRLE the device is in REST status when is should be ACTIVE
IST1221I DATA DEV = 040B STATUS = RESET STATE = N/A
The manual tells me "Subchannel path is not ready" but the device is there an
online.
Any one know how to activate it.
Regards
Stuart
VARY TCPIP,TCPIP,OSAENTA,ON,PORTNAME=TRL408
EZZ0060I PROCESSING COMMAND: VARY
TCPIP,TCPIP,OSAENTA,ON,PORTNAME=TRL408
EZZ0053I COMMAND VARY OSAENTA COMPLETED
SUCCESSFULLY
D NET,TRL,TRLE=TRL408
IST097I DISPLAY ACCEPTED
IST075I NAME = TRL408, TYPE = TRLE 109
IST1954I TRL MAJOR NODE = P19TRL2
IST486I STATUS= ACTIV, DESIRED STATE= ACTIV
IST087I TYPE = LEASED , CONTROL = MPC , HPDT = YES
IST1715I MPCLEVEL = QDIO MPCUSAGE = SHARE
IST1716I PORTNAME = OSA408 LINKNUM = 0 OSA CODE LEVEL = 0891
IST1577I HEADER SIZE = 4096 DATA SIZE = 0 STORAGE = ***NA***
IST1221I WRITE DEV = 0409 STATUS = ACTIVE STATE = ONLINE
IST1577I HEADER SIZE = 4092 DATA SIZE = 0 STORAGE = ***NA***
IST1221I READ DEV = 0408 STATUS = ACTIVE STATE = ONLINE
IST1221I DATA DEV = 040A STATUS = ACTIVE STATE = N/A
IST1724I I/O TRACE = OFF TRACE LENGTH = *NA*
IST1717I ULPID = TCPIP2
IST1815I IQDIO ROUTING DISABLED
IST1918I READ STORAGE = 4.0M(64 SBALS)
IST1757I PRIORITY1: UNCONGESTED PRIORITY2: UNCONGESTED
IST1757I PRIORITY3: UNCONGESTED PRIORITY4: UNCONGESTED
IST2190I DEVICEID PARAMETER FOR OSAENTA TRACE COMMAND = 00-01-00-
05
IST1801I UNITS OF WORK FOR NCB AT ADDRESS X'0F9E4010'
IST1802I P1 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0
IST1802I P2 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0
IST1802I P3 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0
IST1802I P4 CURRENT = 0 AVERAGE = 0 MAXIMUM = 0
IST1724I I/O TRACE = OFF TRACE LENGTH = *NA*
IST314I END
D U,CTC
IEE457I 13.30.19 UNIT
UNIT TYPE STATUS
0400 OSA A-BSY
0401 OSA A
0402 OSA A-BSY
0403 OSA OFFLINE
0404 OSA A-BSY
0405 OSA A
0406 OSA A-BSY
0407 OSA O
0408 OSA A-BSY
0409 OSA A
040A OSA A-BSY
040B OSA O
040C OSA OFFLINE
040D OSA OFFLINE
040E OSA OFFLINE
040F OSA OFFLINE
VTAM BOOK
VBUILD TYPE=TRL
TRL408 TRLE LNCTL=MPC, +
MPCLEVEL=QDIO, +
READ=0408, +
WRITE=0409, +
DATAPATH=(040A,40B), +
PORTNAME=OSA408
----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
