Allan

Have you gone thru the check list for RACF data sharing as indicated in section 
4.9.1.2 of the RACF sysprog manual?

There is a few more things to check apart from ICHRDSNT.

Also - are the LPA and LINK list concatanations on both systems identical? 


Rob Scott
Developer
Rocket Software
275 Grove Street * Newton, MA 02466-2272 * USA
Tel: +1.617.614.2305 
Email: [email protected] 
Web: www.rocketsoftware.com

-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of 
Staller, Allan
Sent: 08 May 2009 11:47
To: [email protected]
Subject: Re: RACF Newbie question

Skip,

Rvary list gives the same indications as the console log. 
i.e. data sharing enabled on LPAR2 (indicated by ICH559I, IRRX005I)
     data sharing *NOT* enabled on LPAR1

ICHRDSNT was copied from LPAR2 to LPAR1 and verified as identical.

Any more ideas, or should I wait for Walt to chime in?



-----Original Message-----
From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of 
Skip Robinson
Sent: Thursday, May 07, 2009 7:15 PM
To: [email protected]
Subject: Re: RACF Newbie question

Please issue TSO command 'RVARY LIST' on both LPARs. There should be no 
indication of data sharing in the response on either system. That's what I see 
in my basic sysplex.

Sharing options are indicated in bit flags in module ICHRDSNT. Even though you 
are using the same RACF data base as named in ICHRDSNT, if you have two 
different copies of the module, the bits may be different in the two versions. 
That is, LPAR2 may be set to allow sharing, while LPAR1 is not.
<Remainder snipped>

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
[email protected] with the message: GET IBM-MAIN INFO Search the archives at 
http://bama.ua.edu/archives/ibm-main.html

----------------------------------------------------------------------
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [email protected] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Reply via email to