I appreciate your honesty about living dangerously and your PS on your failure and I'm thing to myself ... I'm on a 1.4 system ... Should I be concerned?
Thanks, George Rodriguez Specialist, Systems Programmer Network & Technical Services (561) 357-7652 (office) (561) 707-3496 (mobil) School District of Palm Beach County 3348 Forest Hill Blvd. Room B-332 West Palm Beach, FL. 33406-5869 Rated "A" by the Florida Department of Education 2005, 2006, 2007 & 2008 -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of O'Brien, David W. (NIH/CIT) [C] Sent: Friday, May 15, 2009 10:02 AM To: [email protected] Subject: Re: USERCAT Error (Out of Space) Sure, if you like living dangerously. You might consider allocating a new larger catalog then use Idcams Mergecat to move the entries. I would move them selectively ensuring that my most important HLQs were moved first. Also you will want to run Diagnose and Examine commands to make sure the catalog is clean. Good Luck, Dave O'Brien NIH Contractor PS. I have had Mergecat fail in the far distant past which is partially why I prefer CRP. That was years ago and I'm sure IBM has improved the code. ________________________________________ From: IBM Mainframe Discussion List [[email protected]] On Behalf Of George Rodriguez [[email protected]] Sent: Friday, May 15, 2009 9:48 AM To: [email protected] Subject: Re: USERCAT Error (Out of Space) Dave, Can this process be done using standard repro commands or do I need a product to do it? Thanks, George Rodriguez Specialist, Systems Programmer Network & Technical Services (561) 357-7652 (office) (561) 707-3496 (mobil) School District of Palm Beach County 3348 Forest Hill Blvd. Room B-332 West Palm Beach, FL. 33406-5869 Rated "A" by the Florida Department of Education 2005, 2006, 2007 & 2008 -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of O'Brien, David W. (NIH/CIT) [C] Sent: Friday, May 15, 2009 9:41 AM To: [email protected] Subject: Re: USERCAT Error (Out of Space) Catalog Recovery Plus from Mainstar.com will allow you to increase the size of your catalog, re-organize it with optimum CI sizes and move it if necessary to another volume, non-disruptively. In theory this can be done with multiple LPARs accessing the catalog. In practice I've done this type of catalog work during quiet times on Sunday. I suspect there are other products, CRP is just the one with which I'm most familiar. Dave O'Brien NIH Contractor ________________________________________ From: IBM Mainframe Discussion List [[email protected]] On Behalf Of George Rodriguez [[email protected]] Sent: Friday, May 15, 2009 9:23 AM To: [email protected] Subject: USERCAT Error (Out of Space) I've got this out of space problem in one of our user catalogs. Since this particular catalog is used by a bunch of STC, I was thinking of expanding the catalog this Sunday in a window. Here's my question...Is it possible to REORG the catalog to reclaim "dead space"? I've deleted about 600 entries but that only bought me about 4 hours until it got full again. George Rodriguez Specialist, Systems Programmer Network & Technical Services (561) 357-7652 (office) (561) 707-3496 (mobil) School District of Palm Beach County 3348 Forest Hill Blvd. Room B-332 West Palm Beach, FL. 33406-5869 Rated "A" by the Florida Department of Education 2005, 2006, 2007 & 2008 ----------------------------------------- Under Florida law, e-mail addresses are public records. If you do not want your e-mail address released in response to a public records request, do not send electronic mail to this entity. Instead, contact this office by phone or in writing. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
