All, I've taken a quick look through the books, but nothing leaps out at me.
We are a SA390 shop for automation. The problem we have is STC's under SA control that get manually shutdown outside of SA390 control can sometime cause problems with automation. I'm aware that I could logon to SA390, and using the panels shutdown a task, and then start it back up. What I am wondering is: Is there some sort of built-in function to do this all from the console? We find(and I am guilty too), that in the heat of the moment, no one bothers to recycle STC's because you have to logon to SA390 to do it. Am I making sense? Making up an example, I'm thinking something like %SA390,$PJES2 where %SA390 is some sort of CLIST, or builtin SA function that issues the proper SA commands to "tell" SA390 to shutdown JES2(or any other task for that matter). Thanks in advance, Dave _________________________________________________________________ Dave Jousma Assistant Vice President, Mainframe Services [email protected] 1830 East Paris, Grand Rapids, MI 49546 MD RSCB1G p 616.653.8429 f 616.653.8497 This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
