I stand corrected. Here's your doc: http://www-01.ibm.com/software/network/commserver/windows/
It seems to be a -network- product, not a z/os product. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Ward, Mike S Sent: Tuesday, July 07, 2009 2:25 PM To: [email protected] Subject: Re: Communications Server The communications server is an IBM product so I would have guessed that on the z/os side a guide would show me how to connect the CS as an APPN node or better yet, how I could continue to use the DLSW\CISCO connectivity already there. It's not an issue as much as it's what should I do first and how. -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Hal Merritt Sent: Tuesday, July 07, 2009 1:32 PM To: [email protected] Subject: Re: Communications Server Sounds like you have Windows issues, not z/os. Also sounds like you also have some serious political issues in insisting on spending a lot of money just so you can use Windows servers. Not too sure we can be of much help. Doesn't make much business or technical sense when everything you need is available for free. Anyway, the doc you will be needing would be furnished with the Windows Communications Server V6 product and not any IBM site. That would include any and all VTAM or TCP/IP configuration options needed to make their product work. HTH and good luck (you are going to need it). -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Ward, Mike S Sent: Tuesday, July 07, 2009 12:52 PM To: [email protected] Subject: Communications Server Hello all, I have been tasked to move our old sna\sdlc communications controllers to a Windows communications server environment. We currently have z\os V1.7 with VTAM and TCP\IP. We will be getting Windows Communications Server V6 for the windows server that will take the place of the old LU0 controllers at remote locations. I'm not sure where to start in setting up communications from our VTAM environment to this Windows environment. We currently use DLSW and Cisco routers to do the sna/polling of the old controllers. Are there any books red or otherwise that can help me with this? I have searched the IBM site for Windows Communications server and LANDP, but I mostly get z/os communications server books there. Any help will be appreciated. Thank you in advance. ========================== NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ========================== This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to which they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
