Dave, You do need a coupling facility. Either external or lpar.
There is no implicit connectivity. ..............Larry -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of O'Brien, David W. (NIH/CIT) [C] Sent: Tuesday, November 06, 2012 2:47 PM To: [email protected] Subject: HSM COMMON RECALL QUEUE QUESTION After issuing: SETSYS COMMONQUEUE(RECALL(CONNECT(test1))) We get the following: ARC1501I CONNECTION TO STRUCTURE SYSARC_TEST1_RCL WAS 664 ARC1501I (CONT.) UNSUCCESSFUL, RC=0C, REASON=02010C08 <== X'0C' The specified structure is temporarily unavailable. IXL013I IXLCONN REQUEST FOR STRUCTURE SYSARC_TEST1_RCL FAILED. 662 JOBNAME: SYSHSM ASID: 0054 CONNECTOR NAME: HOSTCONNECTION5 IXLCONN RETURN CODE: 0000000C, REASON CODE: 02010C08 NO SUITABLE COUPLING FACILITY IN PREFERENCE LIST CONADIAG0: 00000002 CONADIAG1: 00000008 CONADIAG2: 00000C08 IXL015I STRUCTURE ALLOCATION INFORMATION FOR 663 STRUCTURE SYSARC_TEST1_RCL, CONNECTOR NAME HOSTCONNECTION5, CONNECTIVITY=DEFAULT CFNAME ALLOCATION STATUS/FAILURE REASON -------- ---------------------------------------- SYS3 NO CONNECTIVITY 8800F800 SYS5 NO CONNECTIVITY 8800F800 Our sys1.parmlib has PLEXCFG=MULTISYSTEM, We are at zos 1.13 with 4 LPARs on a single CEC. One of our test LPARs has no tape connectivity so I thought I would eliminate the occasional grousing about tape recalls by setting up CRQ between the 2 LPARs in the TEST Sysplex. Question - Do we need an external coupling facility to do this? I would have thought within a single CEC there would be internal connectivity. TIA, Dave O'Brien ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN This E-mail and any of its attachments may contain Prince George’s County Government or Prince George's County 7th Judicial Circuit Court proprietary information or Protected Health Information, which is privileged and confidential. This E-mail is intended solely for the use of the individual or entity to which it is addressed. If you are not the intended recipient of this E-mail, you are hereby notified that any dissemination, distribution, copying, or action taken in relation to the contents of and attachments to this E-mail is strictly prohibited by federal law and may expose you to civil and/or criminal penalties. If you have received this E-mail in error, please notify the sender immediately and permanently delete the original and any copy of this E-mail and any printout. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
