When we expanded the COMMDS, we did not have any issues with any LPARS while we were switching over to the new one. Thus, I doubt that it will be a problem.
Regards, Hervey -----Original Message----- From: IBM Mainframe Discussion List [mailto:[email protected]] On Behalf Of Leong, Dennis, ITD Sent: Tuesday, November 13, 2012 11:41 AM To: [email protected] Subject: Re: switching to new shared sms commds Hello, I appreciate the advice from folks who responded but my question remains unanswered. .... Will there be any problems (on the other lpars) if I do the setsms commds to point to a new commds for the first lpar? Thank you. ------------------------------ Date: Wed, 7 Nov 2012 08:23:04 +0000 From: Richard Marchant <[email protected]<mailto:[email protected]>> Subject: Re: switching to new shared sms commds Dennis, Make sure you allocate a new COMMDS do not try using an existing one. Richard Hello, I want to switch to new sms commds on current environment that has same commds shared by 3 lpars. I come from an older sms environment where each lpar had their own set of cds's so this is different. Will there be any problems (on the other lpars) if I do the setsms commds to point to a new commds for the first lpar? I believe I will need to issue the same setsms on all lpars to point to new commds. We are z/os 1.13. Thank you. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO IBM-MAIN
